CENELEC

EN 50065-1:2001—Signaling on low-voltage electrical installations in the frequency range 3 to 148.5 kHz—Part 1: General requirements, frequency bands, and electromagnetic disturbances; Amendment A1:1992 to EN 50065-1:1991; Amendment A2:1995 to EN 50065-1:1991; Amendment A3:1996 to EN 50065-1:1991.

EN 50081-1:1992—Electromagnetic compatibility—Generic emission standard—Part 1: Residential, commercial, and light industry.

EN 50081-2:1994—Electromagnetic compatibility—Generic emission standard—Part 2: Industrial environment.

EN 50082-1:1998—Electromagnetic compatibility—Generic immunity standard—Part 1: Residential, commercial, and light industry.

EN 50082-2:1995—Electromagnetic compatibility—Generic immunity standard—Part 2: Industrial environment.

EN 50083-2:2001—Cabled networks for television signals, sound signals, and interactive services—Part 2: Electromagnetic compatibility for equipment; Amendment A1:1997 to EN 50083-2:1995.

EN 50090-2-2:1997—Home and building electronic systems (HBES)—Part 2-2: System overview—General technical requirements.

EN 50091-2:1996—Uninterruptible power systems (UPS)—Part 2: EMC requirements.

EN 50130-4:1996—Alarm systems—Part 4: Electromagnetic compatibility—Product family standard: Immunity requirements for components of fire, intruder, and social alarm systems; Amendment A1:1998 to EN 50130-4:1995.

EN 50148:1996—Electronic taximeters.

EN 50199:1998—Electromagnetic compatibility (EMC)—Product standard for arc welding equipment.

EN 50227:1999—Control circuit devices and switching elements, proximity sensors, dc interface for proximity sensors and switching amplifiers (NAMUR).

EN 50263:2000—Electromagnetic compatibility (EMC)—Product standard for measuring relays and protection equipment.

EN 50270:1999—Electromagnetic compatibility—Electrical apparatus for the detection and measurement of combustible gases, toxic gases, or oxygen.

EN 55011:2000—Industrial, scientific, and medical (ISM) radio-frequency equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:1999 to EN 55011:1998.

EN 55013:2001—Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.

EN 55014-1:2001—Electromagnetic compatibility—Requirements for household appliances, electric tools, and similar apparatus—Part 1: Emission—Product family standard.

EN 55014-2:1997—Electromagnetic compatibility—Requirements for household appliances, electric tools, and similar apparatus—Part 2: Immunity—Product family standard.

EN 55015:2001—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

EN 55020:2002—Electromagnetic immunity of broadcast receivers and associated equipment.

EN 55022:1998—Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:2000 to EN 55022:1998.

EN 55024:1998—Information technology equipment—Immunity characteristics—Limits and methods of measurement; Amendment A1:2001 to EN 55024:1998.

EN 55103-1:1997—Electromagnetic compatibility—Product family standard for audio, video, audiovisual, and entertainment lighting control apparatus for professional use—Part 1: Emission.

EN 55103-2:1997—Electromagnetic compatibility—Product family standard for audio, video, audiovisual, and entertainment lighting control apparatus for professional use—Part 2: Immunity.

EN 55104:1995—Electromagnetic compatibility—Immunity requirements for household appliances, tools, and similar apparatus—Product family standard.

EN 60204-31:1998—Safety of machinery—Electrical equipment of machines—Part 31: Particular safety and EMC requirements for sewing machines, units, and systems.

EN 60439-1:1999—Low-voltage switch gear and control gear assemblies—Part 1: Type-tested and partially type-tested assemblies.

EN 60521:1995—Class 0.5, 1, and 2 alternating-current watt-hour meters.

EN 60555-2:1987—Disturbances in supply systems caused by household appliances and similar electrical equipment—Part 2: Harmonics.

EN 60555-3:1987—Disturbances in supply systems caused by household appliances and similar electrical equipment—Part 3: Voltage fluctuations; Amendment A1:1991 to EN 60555-3:1987.

EN 60669-2-1:2000—Switches for household and similar fixed electrical installations—Part 2: Particular requirements—Section 1: Electronic switches; Amendment A11:1997 to EN 60669-2-1:1996.

EN 60669-2-2:1998—Switches for household and similar fixed electrical installations—Part 2: Particular requirements—Section 2: Electromagnetic remote-control switches (RCS).

EN 60669-2-3:1999—Switches for household and similar fixed electrical installations—Part 2-3: Particular requirements—Time-delay switches (TDS).

EN 60687:1993—Alternating current static watt-hour meters for active energy (classes 0.2 S and 0.5 S).

EN 60730-1:2001—Automatic electrical controls for household and similar use—Part 1: General requirements; Amendment A11:1996 to EN 60730-1:1995; Amendment A17:2000 to EN 60730-1:1995.

EN 60730-2-11:1994—Automatic electrical controls for household and similar use—Part 2-11: Particular requirements for energy regulators; Amendment A1:1997 to EN 60730-2-11:1993.

EN 60730-2-13:1998—Automatic electrical controls for household and similar use—Part 2-13: Particular requirements for humidity sensing controls.

EN 60730-2-14:1998—Automatic electrical controls for household and similar use—Part 2-14: Particular requirements for electric actuators.

EN 60730-2-18:1999—Automatic electrical controls for household and similar use—Part 2-18: Particular requirements for automatic electrical water and air-flow sensing controls, including mechanical requirements.

EN 60870-2-1:1996—Telecontrol equipment and systems—Part 2: Operating conditions—Section 1: Power supply and electromagnetic compatibility.

EN 60945:2002—Maritime navigation and radiocommunication equipment and systems—General requirements—Methods of testing and required test results.

EN 60947-1:1999—Low-voltage switch gear and control gear—Part 1: General rules.

EN 60947-2:1996—Low-voltage switch gear and control gear—Part 2: Circuit breakers; Amendment A1:1997 to EN 60947-2:1996.

EN 60947-3:1999—Low-voltage switch gear and control gear—Part 3: Switches, disconnectors, switch-disconnectors, and fuse-combination units.

EN 60947-4-1:2001—Low-voltage switch gear and control gear—Part 4-1: Contactors and motor starters—Electromechanical contactors and motor starters; Amendment A2:1997 to EN 60947-4-1:1992.

EN 60947-4-2:2000—Low-voltage switch gear and control gear—Part 4-2: Contactors and motor starters—Ac semiconductor motor controllers and starters.

EN 60947-4-3:2000—Low-voltage switch gear and control gear—Part 4-3: Contactors and motor starters—Ac semiconductor controllers and contactors for nonmotor loads.

EN 60947-5-1:1998—Low-voltage switch gear and control gear—Part 5-1: Control circuit devices and switching elements—Electromechanical control circuit devices; Amendment A12 to EN 60947-5-1:1997.

EN 60947-5-2:1999—Low-voltage switch gear and control gear—Part 5-2: Control circuit devices and switching elements—Proximity switches.

EN 60947-5-3:1999—Low-voltage switch gear and control gear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behavior under fault conditions (PDF).

EN 60947-5-6:2001—Low-voltage switch gear and control gear—Part 5-6: Control circuit devices and switching elements—Dc interface for proximity sensors and switching amplifiers (NAMUR).

EN 60947-6-1:1992—Low-voltage switch gear and control gear—Part 6-1: Multiple-function equipment—Automatic transfer switching equipment; Amendment A2:1997 to EN 60947-6-1:1991.

EN 60947-6-2:1993—Low-voltage switch gear and control gear—Part 6-2: Multiple-function equipment—Control and protective switching devices (or equipment) (CPS); Amendment A1:1997 to EN 60947-6-2:1993.

EN 61000-3-2:2001—Electromagnetic compatibility (EMC)—Part 3-2: Limits—Limits for harmonic current emissions (equipment input current up to and including 16 A per phase).

EN 61000-3-3:1995—Electromagnetic compatibility (EMC)—Part 3-3: Limits—Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A per phase and not subject to conditional connection; Amendment A1:2001 to EN 61000-3-3:1995.

EN 61000-3-11:2000—Electromagnetic compatibility (EMC)—Part 3-11: Limits—Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems—Equipment with rated current less than or equal to 75 A and subject to conditional connection.

EN 61000-6-1:2001—Electromagnetic compatibility (EMC)—Part 6-1: Generic standards—Immunity for residential, commercial, and light-industrial environments.

EN 61000-6-2:2001—Electromagnetic compatibility (EMC)—Part 6-2: Generic standards—Immunity for industrial environments.

EN 61000-6-3:2001—Electromagnetic compatibility (EMC)—Part 6-3: Generic standards—Emission standard for residential, commercial, and light-industrial environments.

EN 61000-6-4:2001—Electromagnetic compatibility (EMC)—Part 6-4: Generic standards—Emission standard for industrial environments.

EN 61008-1:1995—Electrical accessories—Residual current–operated circuit breakers (RCCBs) without integral overcurrent protection for household and similar uses—Part 1: General rules.

EN 61009-1:1995—Electrical accessories—Residual current–operated circuit breakers (RCCBs) with integral overcurrent protection for household and similar uses—Part 1: General rules.

EN 61036:1997—Alternating current static watt-hour meters for active energy (classes 1 and 2); Amendment A1:2000 to EN 61036:1996.

EN 61037:1992—Electricity metering—Tariff and load control—Particular requirements for electronic ripple control receivers; Amendment A1:1996 to EN 61037:1992; Amendment A2:1998 to EN 61037:1992.

EN 61038:1993—Electricity metering—Tariff and load control—Particular requirements for time switches; Amendment A2:1998 to EN 61038:1992.

EN 61131-2:2000—Programmable controllers—Part 2: Equipment requirements and tests.

EN 61204-3:2001—Low-voltage power supplies, dc output—Part 3: Electromagnetic compatibility (EMC).

EN 61268:1996—Alternating current static var-hour meters for reactive energy (classes 2 and 3).

EN 61326:1998—Electrical equipment for measurement, control, and laboratory use—EMC requirements.

EN 61543:1996—Residual current–operated protective devices (RCDs) for household and similar use—Electromagnetic compatibility.

EN 61547:1996—Equipment for general lighting purposes—EMC immunity requirements.

EN 61800-3:1997—Adjustable speed electrical power drive systems—Part 3: EMC product standard including specific test methods.

EN 61812-1:1996—Specified time relays for industrial use—Part 1: Requirements and tests.

CEN

EN 12015:1998—Electromagnetic compatibility—Product family standard for lifts, escalators, and passenger conveyors—Emission.

EN 12016:1998—Electromagnetic compatibility—Product family standard for lifts, escalators, and passenger conveyors—Immunity.

EN ISO 14982:1998—Agricultural and forestry machines—Electromagnetic compatibility—Test methods and acceptance criteria (ISO 14982:1998).

ETSI

EN 300 065-2 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 2: Harmonized EN covering essential requirements of Article 3.2 of the R&TTE Directive.

EN 300 065-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 3: Harmonized EN covering essential requirements of Article 3.3 (e) of the R&TTE Directive.

EN 300 086-2 V1.3.1 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 113-2 V1.2.1 (04-2002)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 135-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Angle-modulated citizens band radio equipment (CEPT PR 27 Radio Equipment); Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 152-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 2: Harmonized R&TTE Directive.

EN 300 152-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 3: Harmonized EN under Article 3.3 (e) of the R&TTE Directive.

EN 300 162-2 V1.1.2 (12-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 2: Harmonized EN covering essential requirements under Article 3.3 of the R&TTE Directive.

EN 300 162-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 3: Harmonized EN covering essential requirements under Article 3.3 (e) of the R&TTE Directive.

EN 300 219-2 V1.1.1 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 220-1 V1.2.1 (11-1997)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices; Technical characteristics and test methods for radio equipment to be used in the 25 to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Parameters intended for regulatory purposes.

EN 300 220-3 V1.1.1 (09-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 224-2 V1.1.1 (01-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 279 V1.2.1 (02-1999)—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).

EN 300 296-2 V1.1.1 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment using integral antennas intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 328-2 V1.2.1 (12-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 330-2 V1.1.1 (06-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 339 V1.1.1 (06-1998)—Electromagnetic compatibility and radio spectrum matters (ERM); General electromagnetic compatibility (EMC) for radio communications equipment.

EN 300 341-2 V1.1.1 (12-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 385 V1.2.1 (10-1999)—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment.

EN 300 385/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment with data rates at around 2 Mbit/sec and above.

EN 300 386 V1.3.2 (05-2003)—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equip-ment; Electromagnetic compatibility (EMC) requirements.

EN 300 386-2:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard.

EN 300 390-2 V1.1.1 (09-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 422-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 433-2 V1.1.1 (12-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Double sideband (DSB) and/or single sideband (SSB) amplitude modulated citizens band radio equipment; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.

EN 300 440-2 V1.1.1 (09-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 454-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Wide band audio links; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 300 827:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for terrestrial trunked radio (TETRA) and ancillary equipment.

EN 300 828:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands.

EN 300 829:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime mobile earth stations (MMES) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDC) for the global maritime distress and safety system (GMDSS).

EN 300 831:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for mobile earth stations (MES) used within satellite personal communications networks (S-PCN) operating in the 1.5/1.6/2.4 GHz and 2 GHz frequency bands.

EN 301 011:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for narrow-band direct-printing (NBDP) Navtex receivers operating in the maritime mobile service.

EN 301 025-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 301 025-3 V1.1.1 (05-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 3: Harmonized EN under Article 3.3 (e) of the R&TTE Directive.

EN 301 090:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime radiotelephone watch receivers operating on 2182 kHz.

EN 301 178-2 V1.1.1 (08-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Portable very-high frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

EN 301 357-2 V1.2.1 (06-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Cordless audio devices in the range 25 MHz to 2000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.

ETS 300 197/A2:1997—Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 38 GHz.

ETS 300 198/A1:1997—Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 23 GHz.

ETS 300 342-1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European digital cellular telecommunications system (GSM 900 MHz and DCS 1800 MHz); Part 1: Mobile and portable radio and ancillary equipment.

ETS 300 384/A1:1997—Radio broadcasting systems; Very-high frequency (VHF), frequency modulated, sound broadcasting transmitters.

ETS 300 328/A1:1997—Radio equipment and systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques.

ETS 300 340/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European radio message system (ERMES) paging receivers.

ETS 300 341/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver.

ETS 300 224 (03-1998)—Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Technical and functional characteristics for on-site paging systems, including test methods.

ETS 300 279/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).

ETS 300 296/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using integral antennas intended primarily for analog speech.

ETS 300 329:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for digital enhanced cordless telecommunications (DECT) equipment.

ETS 300 390/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and using an integral antenna.

ETS 300 433/A2:1997—Radio equipment and systems (RES); Double-sideband (DSB) and/or single-sideband (SSB) amplitude modulated citizens band (CB) radio equipment; Technical characteristics and methods of measurement.

ETS 300 445/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for wireless microphones and similar radio-frequency (RF) audio link equipment.

ETS 300 446:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for second-generation cordless telephone (CT2) apparatus operating in the frequency band 864.1 to 868.1 MHz, including public access services.

ETS 300 447:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for VHF FM broadcasting transmitters.

ETS 300 454/A1:1997—Radio equipment and systems (RES); Wideband audio links; Technical characteristics and test methods.

ETS 300 460:1997—Satellite earth stations and systems (SES); Maritime mobile earth stations (MMES) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDCs) for the global maritime distress and safety system (GMDSS); Technical characteristics and methods of measurement.

ETS 300 487/A1:1997—Satellite earth stations and systems (SES); Receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications; Radio-frequency (RF) specifications.

ETS 300 673 V1.2.1 (03-2000)—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for 4/6 GHz and 11/12/14 GHz very small aperture terminal (VSAT) equipment and 11/12/13/14 GHz satellite news gathering (SNG) transportable earth station (TES) equipment.

ETS 300 680:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for citizens band (CB) radio and ancillary equipment (speech and/or non-speech); Part 1: Angle modulated; Part 2: Double sideband (DSB) and/or single sideband (SSB).

ETS 300 682:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for on-site paging equipment.

ETS 300 683:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for short-range devices (SRD) operating on frequencies between 9 kHz and 25 GHz.

ETS 300 684:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for commercially available amateur radio equipment.

ETS 300 717:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for analog cellular radio communications equipment; Mobile and portable equipment.

ETS 300 719-1:1997—Radio equipment and systems (RES); Private wide-area paging service; Part 1: Technical characteristics for private wide-area paging system.

ETS 300 741:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for wide-area paging equipment.

ETS 300 826:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for 2.4 GHz wideband transmission systems and high-performance radio local-area network (HIPERLAN) equipment.

ETS 300 830:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications.

Australian Standards

AS/NZS 1044:1995—Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools, and similar electric apparatus; Amendment 2:2000 to AS/NZS 1044:1995.

AS/NZS 1053:1999—Limits and methods of measurement of radio interference characteristics of sound and television receivers and associated equipment.

AS/NZS 2064:1997—Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment; Amendment 1:1997 to AS/NZS 2064:1997.

AS/NZS 2557:1999—Limits and methods of measurement of radio interference characteristics of vehicles, motor boats, and spark-ignited engine-driven vehicles.

AS/NZS 3548:1995—Limits and methods of measurement of radio disturbance characteristics of information technology equipment; Amendment 1:1997 to AS/NZS 3548:1995; Amendment 2:1997 to AS/NZS 3548:1995.

AS/NZS 3652:1998—Electromagnetic compatibility—Arc welding equipment.

AS/NZS 4051:1998—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

AS/NZS 4251.1:1999—Electromagnetic compatibility (EMC)—Generic emission standard—Residential, commercial, and light industry.

AS/NZS 4251.2: 1999—Electromagnetic compatibility (EMC)—Generic emission standard—Industrial environments.

AS 62040.2—Uninterruptible power systems—Electromagnetic compatibility (EMC) requirements.

Canadian Standards

CAN/CSA C108.1.1:1977 (R1999)—Electromagnetic interference measuring instrument—CISPR type.

CAN/CSA C108.1.2:M1981 (R1999)—Electromagnetic interference measuring instrument—ANSI type.

CAN/CSA C108.1.5-M85 (R1999)—Line impedance stabilization network (LISN).

CAN/CSA C108.3.1-M84 (R2000)—Limits and measurement methods of electromagnetic noise from ac power systems, 0.15–30 MHz.

CAN/CSA-C108.4-M92 (R2003)—Limits and methods of measurement of radio interference characteristics of vehicles, motorboats, and spark-ignited engine-driven devices.

CAN/CSA-C108.6-M91 (R2003)—Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment (adopted CISPR 11:1990).

CAN/CSA C108.8-M83 (R2000)—Limits and methods of measurement of electromagnetic emissions from data processing equipment and electronic office machines.

CAN/CSA-C108.9-M91 (R1999)—Sound and television broadcasting receivers and associated equipment—limits and methods of measurement of immunity characteristics.

CAN/CSA-CEI/IEC 1000-1-1-97 (R2001)—Electromagnetic compatibility (EMC)—Part 1: General—Section 1: Application and interpretation of fundamental definitions and terms (adopted CEI/IEC 1000-1-1:1992).

CAN/CSA-CEI/IEC 1000-2-1-97 (R2001)—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 1: Description of the environment—Electromagnetic environment for low frequency conducted disturbances and signalling in public power supply systems (adopted CEI/IEC 1000-2-1:1990).

CAN/CSA CISPR 22-02—Limits and methods of measurement of radio disturbance characteristics of information technology equipment. Adopted CISPR 22:1997, third edition, 1997-11 with Canadian deviations.

CAN/CSA E1000-2-2:1997 (R2001)—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 2: Compatibility levels for low frequency conducted disturbances and signalling in public low-voltage power supply systems (adopted CEI/IEC 1000-2-2:1990).

CAN/CSA-CEI/IEC 61000-4-2-01—Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques—Electrostatic discharge immunity test (Adopted CEI/IEC 61000-4-2:1995 + A1:1998, edition 1.1, 1999-05).

CAN/CSA-CEI/IEC 61000-4-3-01—Electromagnetic compatibility (EMC)—Part 4-3: Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test (Adopted CEI/IEC 61000-4-3:1995 + A1:1998, Edition 1.1, 1998-11).

CAN/CSA-CEI/IEC 61000-4-4-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 4: Electrical fast transient/burst immunity test—Basic EMC publication (Adopted CEI/IEC 1000-4-4:1995, first edition, 1995-01, including Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-5-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 5: Surge immunity test (Adopted CEI/IEC 1000-4-5:1995, first edition, 1995-02, including Corrigendum October 1995 and Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-6-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 6: Immunity to conducted disturbances, induced by radio-frequency fields (Adopted CEI/IEC 1000-4-6:1996, first edition, 1996-03, including Corrigendum September 1996 and Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-8-02—Electromagnetic compatibility (EMC)—Part 4-8: Testing and measurement techniques—Power frequency magnetic field immunity test (Adopted CEI/IEC 61000-4-8:1993 + A1:2000, edition 1.1, 2001-03).

CAN/CSA-CEI/IEC 61000-4-9-02—Electromagnetic compatibility (EMC)—Part 4-9: Testing and measurement techniques—Pulse magnetic field immunity test (Adopted CEI/IEC 61000-4-9:1993 + A1:2000, edition 1.1, 2001-03).

CAN/CSA-CEI/IEC 61000-4-11-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measuring techniques—Section 11: Voltage dips, short interruptions, and voltage variations immunity tests (Adopted CEI/IEC 1000-4-11:1994, first edition, 1994-06 including Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-12-01—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 12: Oscillatory waves immunity test basic EMC publication (Adopted CEI/IEC 1000-4-12:1995, first edition, 1995-05, including Amendment 1:2000).

CAN/CSA-CEI/IEC 61000-4-16-02—Electromagnetic compatibility (EMC)—Part 4-16: Testing and measurement techniques—Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted CEI/IEC 61000-4-16:1998, first edition, 1998-01, including Amendment 1:2001).

CAN/CSA-CEI/IEC 61000-4-17-02—Electromagnetic compatibility (EMC)—Part 4-17: Testing and measurement techniques—Ripple on dc input power port immunity test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001).

CAN/CSA-CEI/IEC 61000-4-27-01—Electromagnetic compatibility (EMC)—Part 4-27: Testing and measurement techniques—Unbalance, immunity test (Adopted CEI/IEC 61000-4-27:2000, first edition, 2000-08).

CAN/CSA-CEI/IEC 61000-4-28-01—Electromagnetic compatibility (EMC)—Part 4-28: Testing and measurement techniques—Variation of power frequency, immunity test (Adopted CEI/IEC 61000-4-28:1999, first edition, 1999-11).

European Standards

CISPR 11, Edition 4.0—Industrial, scientific, and medical (ISM) radio-frequency equipment electromagnetic disturbance characteristics—Limits and methods of measurement.

CISPR 12:1997—Vehicles, motorboats, and spark-ignited engine-driven devices—Radio disturbance characteristics—Limits and methods of measurement.

CISPR 13, Edition 4.1—Limits and methods of measurement of radio interference characteristics of sound and television broadcast receivers and associated equipment.

CISPR 14-1, Amendment 2, Edition 4.0—EMC—Requirements for household appliances, electric tools, and similar apparatus—Part 1: Emission.

CISPR 15, Consolidated, Edition 6.2—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

CISPR 16-1, Consolidated, Edition 2.1—Specification for radio disturbance and immunity measuring apparatus and methods—Part 1: Radio disturbance and immunity measuring apparatus.

CISPR 16-2, Consolidated, Edition 1.2—Specification for radio disturbance and immunity measuring apparatus and methods—Part 2: Methods of measurement of disturbances and immunity; Amendment 1:1999 to CISPR 16-2:1999.

CISPR 16-3, Consolidated, Edition 1.1—Specification for radio disturbance and immunity measuring apparatus and methods—Part 3: Reports and recommendations of CISPR.

CISPR 16-4, Edition 1.0—Specification for radio disturbance and immunity measuring apparatus and methods—Part 4: Uncertainty in EMC measurements.

CISPR 17:1981—Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components.

CISPR 18-3:1986—Code of practice for minimizing the generation of radio noise; Amendment A1:1996 to CISPR 18-3:1986.

CISPR 19:1983—Guidance on the use of substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz.

CISPR 20:1999—Sound and television broadcast receivers and associated equipment immunity characteristics—Limits and methods of measurement.

CISPR 21:1999—Interference to mobile radiocommunications in the presence of impulsive noise—Methods of judging degradation and measures to improve performance.

CISPR 22, Edition 4.0—Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment 1:2000 to CISPR 22:1997.

CISPR 23:1987—Determination of limits for industrial, scientific, and medical equipment.

CISPR 24:1997—Information technology equipment —Immunity characteristics—Limits and methods of measurement.

CISPR 25, Edition 2.0—Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used onboard vehicles, boats, and on devices.

CISPR 61000-6-3:1996—Electromagnetic compatibility (EMC)—Part 6: Generic standards—Section 3: Emission standard for residential, commercial, and light-industrial environments.

CISPR/TR 16-3:2000—Specification for radio disturbance and immunity measuring apparatus and methods—Part 3: Reports and recommendations of CISPR.

CISPR/TR 28:1997—Industrial, scientific, and medical equipment (ISM)—Guidelines for emission levels within the bands designated by the ITU.

EN 300 127:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Radiated emission testing of physically large telecommunication systems.

EN 300 386:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements.

EN 300 386-2:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard.

EN 301 489-1:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.

EN 301 489-2:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment.

EN 301 489-3:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short-range devices (SRD) operating on frequencies between 9 kHz and 40 GHz.

EN 301 489-4:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services.

EN 301 489-5:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for private land mobile radio (PMR) and ancillary equipment (speech and nonspeech).

EN 301 489-6:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for digital enhanced cordless telecommunications (DECT) equipment.

EN 301 489-7:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS).

EN 301 489-8:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations.

EN 301 489-9:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones and similar radio-frequency (RF) audio link equipment.

EN 301 489-10:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for first- (CT1 and CT1+) and second-generation cordless telephone (CT2) equipment.

EN 301 489-12:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for very small aperture terminal, satellite interactive earth stations operated in the frequency ranges between 4 GHz and 30 GHz in the fixed satellite service (FSS).

EN 301 489-13:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 13: Specific conditions for citizens band (CB) radio and ancillary equipment (speech and nonspeech).

EN 301 489-15:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment.

EN 301 489-16:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 16: Specific conditions for analog cellular radio communications equipment, mobile and portable.

EN 301 489-17:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for wideband data and HIPERLAN equipment.

EN 301 489-18:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for terrestrial trunked radio (TETRA) equipment.

EN 301 489-19:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications.

EN 301 489-20:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for mobile earth stations (MES) used in the mobile satellite services (MSS).

EN 301 489-22:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground-based VHF aeronautical mobile and fixed radio equipment.

EN 301 843-1 Draft:2003—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements.

EN 301 843-2 Draft:2003—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for radiotelephone transmitters and receivers.

EN 301 843-4 Draft:2003—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 4: Specific conditions for narrow-band direct-printing (NBDP) NAVTEX receivers.

EN 50147-1:1997—Anechoic chambers—Part 1: Shield attenuation measurement.

EN 50286:2001—Electrical insulating protective clothing for low-voltage installations.

EN 55011:1998—Industrial, scientific, and medical (ISM) radio-frequency equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:1999 to EN 55011:1998.

EN 55015:2001—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment A1:1997 to EN 55015:1996; Amendment A2:1999 to EN 55015:1996.

EN 55022:1998—Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:2000 to EN 55022:1998.

EN 60076-1:1997—Power transformers—Part 1: General; Amendment A11:1997 to EN 60076-1:1997; Amendment A1:2000 to EN 60076-1:1997.

EN 60143-3:1998—Series capacitors for power systems—Part 3: Internal fuses.

EN 60255-22-3:2001—Electrical relays—Part 22-3: Electrical disturbance tests for measuring relays and protection equipment—Radiated electromagnetic field disturbance tests.

EN 60834-1:2000—Teleprotection equipment of power systems—Performance and testing—Part 1: Command systems.

EN 61000-2-9:1996—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 9: Description of HEMP environment—Radiated disturbance.

EN 61000-4-3:2002—Electromagnetic compatibility (EMC)—Part 4-3: Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test; Amendment A1:1998 to EN 61000-4-3:1996.

EN 61000-4-6:1996—Electromagnetic compatibility (EMC)—Part 4-6: Testing and measurement techniques—Immunity to conducted disturbances induced by radio-frequency fields.

EN 61000-4-7:2002—Electromagnetic compatibility (EMC)—Part 4-7: Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto.

EN 61000-4-8:1994—Electromagnetic compatibility (EMC)—Part 4-8: Testing and measurement techniques—Power frequency magnetic field immunity test.

EN 61000-4-9:1994—Electromagnetic compatibility (EMC)—Part 4-9: Testing and measurement techniques—Pulse magnetic field immunity test.

EN 61000-4-23:2001—Electromagnetic compatibility (EMC)—Part 4-23: Testing and measurement techniques—Test methods for protective devices for HEMP and other radiated disturbances.

EN 61000-4-28:2000—Electromagnetic compatibility (EMC)—Part 4-28: Testing and measurement techniques—Variation of power frequency, immunity test.

EN 61248-3:1997—Transformers and inductors for use in electronic and telecommunication equipment—Part 3: Sectional specification for power transformers on the basis of the capability approval procedure.

EN 61248-4:1997—Transformers and inductors for use in electronic and telecommunication equipment—Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure.

EN 62053-31:1999—Electricity metering equipment (ac)—Particular requirements—Part 31: Pulse output devices for electromechanical and electronic meters (two wires only).

ENV 50091-3:1998—Uninterruptible Power Systems (UPS)—Part 3: General requirements and test methods.

ES 201 468:2002—Electromagnetic compatibility and radio spectrum matters (ERM); Additional electromagnetic compatibility (EMC) requirements for telecommunications equipment for enhanced availability of service in specific applications.

ETS 300 127:1994—Equipment engineering (EE); Radiated emission testing of physically large telecommunication systems.

ETS 300 162:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement.

ETS 300 386-1:1994—Equipment engineering (EE); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 1: Product family overview, compliance criteria, and test levels.

IEC 61000-1-2:2001—Electromagnetic compatibility (EMC)—Part 1-2: General—Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena.

IEC 61000-3-2:2001—Electromagnetic compatibility (EMC)—Part 3: Limits. Section 2: Limits for harmonic current emissions for electronic equipment (equipment input current less than 16 A per phase).

IEC 61000-3-3:2002—Electromagnetic compatibility (EMC)—Part 3-3: Limits—Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A.

IEC 61000-3-11:2001—Electromagnetic compatibility (EMC)—Part 3-11: Limits—Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems—Equipment with rated voltage current less than or equal to 75 A and subject to conditional connection.

R014-001:1999—Guide for the evaluation of electromagnetic fields around power transformers.

TR 101 651:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Classification of the electromagnetic environment conditions for equipment in telecommunication networks.

Other Standards

AE4L-81-2:1989—Test waveforms and techniques for assessing the effects of lightning-induced transients.

AIR 1147A:1970—Electromagnetic interference on aircraft from jet engine charging.

AIR 1209:1998—Construction and calibration of parallel plate transmission line for electromagnetic interference susceptibility testing.

AIR 1221:1971—Electromagnetic compatibility (EMC) system design checklist.

AIR 1255:1971—Spectrum analyzers for electromagnetic interference measurements.

AIR 1394:1998—Cabling guidelines for electromagnetic compatibility.

AIR 1404:1976—Dc resistivity versus RF impedance of EMI gaskets.

AIR 1423:1977—Electromagnetic compatibility on gas turbine engines for aircraft propulsion.

AIR 1425:1998—Methods of achieving electromagnetic compatibility of gas turbine engine accessories, for self-propelled vehicles.

AIR 1700:1998—Upper frequency measurement boundary for evaluation of shielding effectiveness in cylindrical systems.

ANSI C37.32:2002—American national standard for switchgear—High-voltage air switches, bus supports, and switch accessories—Schedules of preferred ratings, manufacturing specifications, and application guide.

ANSI C37.42:1996—American national standard for switchgear—Distribution cutouts and fuse links—Specifications.

ANSI C37.44:1981 (R1992)—American national standard specifications for distribution oil cutouts and fuse links.

ANSI C37.45:1981 (R1992)—American national standard specifications for distribution enclosed single-pole air switches.

ANSI C37.50:1989—American national standard for switchgear—Low-voltage ac power circuit breakers used in enclosures—Test procedures.

ANSI C37.51:1989—American national standard for switchgear—Metal-enclosed low-voltage ac power circuit-breaker switchgear assemblies—Conformance test procedures.

ANSI C37.52:2000—American national standard test procedures for low-voltage ac power circuit protectors used in enclosures.

ANSI C37.54:2002—American national standard for switchgear—Indoor alternating-current high-voltage circuit breakers applied as removable elements in metal-enclosed switchgear assemblies—Conformance test procedures.

ANSI C37.55:2002—American national standard for switchgear—Metal-clad switchgear assemblies—Conformance test procedures.

ANSI C37.57:1990—American national standard for switchgear—Metal-enclosed interrupter switchgear assemblies—Conformance testing.

ANSI C37.58:1990—American national standard for switchgear—Indoor ac medium-voltage switches for use in metal-enclosed switchgear—Conformance test procedures.

ANSI C37.66:1969 (R1997)—American national standard for requirements for oil-filled capacitor switches for alternating-current systems.

ANSI C37.85:2002—American national standard for switchgear—Alternating-current high-voltage power vacuum interrupters—Safety requirements for x-radiation limits.

AS 8023:1985—Airborne static electric power inverters.

AS 13441:1998—Test methods for electrical connectors.

AS 25064:1999—Conduit, flexible, radio-frequency shielding.

ASTM B904:2000—Standard specification for autocatalytic nickel over autocatalytic copper for electromagnetic interference shielding.

ASTM E1004:2002—Electrical conductivity, using the electromagnetic (eddy current) method, determining.

IEEE 32:1972 (R1997)—IEEE standard requirements, terminology, and test procedures for neutral grounding devices.

IEEE 81:1983—Guide for measuring earth resistivity, ground impedance, and earth surface potentials of a ground system.

IEEE 139:1988 (R1999)—IEEE recommended practice for the measurement of radio-frequency emission from industrial, scientific, and medical (ISM) equipment installed on user's premises.

IEEE 140:1990 (R1995)—IEEE recommended practice for minimization of interference from radio-frequency heating equipment.

IEEE 213:1987 (R1998)—IEEE standard procedure for measuring conducted emissions in the range of 300 kHz to 25 MHz from television and FM broadcast receivers to power lines.

IEEE 291:1991—IEEE standard methods for measuring electromagnetic field strength of sinusoidal continuous waves, 30 Hz to 30 GHz.

IEEE 299:1997—IEEE standard for measuring the effectiveness of the electromagnetic shielding enclosure.

IEEE 376:1974 (R1998)—IEEE standard for the measurement of impulse strength and impulse bandwidth.

IEEE 469:1988 (R1994)—IEEE recommended practice for voice-frequency electrical-noise tests of distribution transformers.

IEEE 473:1985 (R1997)—IEEE recommended practice for an electromagnetic site survey (10 kHz to 10 GHz).

IEEE 475:2000—IEEE standard measurement procedure for field-disturbance sensors, 300 MHz to 40 GHz.

IEEE 518:1982 (R1996)—IEEE guide for the installation of electrical equipment to minimize noise inputs to controllers from external sources.

IEEE 539:1990—IEEE standard definitions of terms relating to corona and field effects of overhead power lines.

IEEE 644:1994 (R2001)—IEEE standard procedure for measurement of power frequency electric and magnetic fields from ac power lines.

IEEE 776:1992 (R1998)—IEEE recommended practice for inductive coordination of electric supply and communication lines.

IEEE 824:1994—IEEE standard for series capacitors in power systems.

IEEE 935:1989 (R2001)—IEEE guide on terminology for tools and equipment to be used in live-line working (IEC 743:1983).

IEEE 1036:1992—IEEE guide for application of shunt power capacitors.

IEEE 1048:1990—IEEE guide for protective grounding of power lines.

IEEE 1128:1998—IEEE recommended practice for radio-frequency (RF) absorber evaluation in the range of 30 MHz to 5 GHz.

IEEE 1140:1994 (R1999)—IEEE standard test procedures for the measurement of electric and magnetic fields from video display terminals (VDTs) from 5 Hz to 400 kHz.

IEEE 1247:1998—IEEE standard for interrupter switches for ac, rated above 1000 V.

IEEE 1302:1998—IEEE guide for the electromagnetic characterization of conductive gaskets in the frequency range of dc to 18 GHz (references IEEE 100:1996 and 299:1997).

IEEE 1309:1996—IEEE standard for calibration of electromagnetic field sensors and probes excluding antennas from 9 kHz to 40 GHz.

IEEE 1460:1996—IEEE guide for the measurement of quasi-static magnetic and electric fields.

IEEE C37.04:1999—IEEE standard rating structure for ac high-voltage circuit breakers.

IEEE C37.09:1999—IEEE standard test procedure for ac high-voltage circuit breakers rated on a symmetrical current basis.

IEEE C37.010:1999—IEEE application guide for ac high-voltage circuit breakers rated on a symmetrical current basis.

IEEE C37.012:1979 (R2000)—IEEE application guide for capacitance current switching for ac high-voltage circuit breakers rated on a symmetrical current basis.

IEEE C37.083:1999—IEEE guide to synthetic capacitive current-switching test of ac high-voltage circuit breakers.

IEEE C37.14:2002—IEEE standard for low-voltage dc power circuit breakers used in enclosures.

IEEE C37.24:1986 (R1998)—IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear.

IEEE C37.26:1972 (R1996)—IEEE standard guide for methods of power-factor measurement for low-voltage inductive test circuits.

IEEE C37.27:1987 (R1998)—IEEE standard application guide for low-voltage ac nonintegrally fused power circuit breakers (using separately mounted current-limiting fuses).

IEEE C37.29:1981 (R1990)—IEEE standard for low-voltage ac power circuit protectors used in enclosures.

IEEE C37.30:1997—IEEE standard requirements for high-voltage switches.

IEEE C37.34:1994—IEEE standard test code for high-voltage air switches.

IEEE C37.35:1995—IEEE guide for the application, installation, operation, and maintenance of high-voltage air disconnecting and load interrupter switches.

IEEE C37.36B:1990—IEEE guide to current interruption with horn-gap air switches.

IEEE C37.37:1996—IEEE standard for loading guide for ac high-voltage air switches (in excess of 1000 V).

IEEE C37.38:1989—IEEE standard for gas-insulated, metal-enclosed disconnecting, interrupter, and grounding switches.

IEEE C37.40:1993—IEEE standard service conditions and definitions for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.

IEEE C37.40B:1996—IEEE standard service conditions and definitions for external fuses for shunt capacitors.

IEEE C37.41:2000—IEEE standard design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.

IEEE C37.41E:1996—IEEE standard design tests for external fuses and shunt capacitors.

IEEE C37.48:1997—IEEE guide for application, operation, and maintenance of high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.

IEEE C37.59:2002—IEEE standard requirements for conversion of power switchgear equipment.

IEEE C37.60:1981 (R1992)—IEEE standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic circuit reclosers and fault interrupters for ac systems.

IEEE C37.61:1973 (R1992)—IEEE standard guide for the application, operation, and maintenance of automatic circuit reclosers.

IEEE C37.63:1997—IEEE standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic line sectionalizers of ac systems (references: IEEE 4:1995, 386:1995, C37.09:1979 [R1988], C37.24:1986 [R1991], C37.100:1992).

IEEE C37.71:2001—IEEE standard for three-phase, manually operated subsurface load interrupting switches for alternating current systems.

IEEE C37.81:1989 (R1999)—IEEE guide for seismic qualification of Class 1E metal-enclosed power switchgear assemblies.

IEEE C37.90.2:1995 (R2001)—IEEE standard withstand capability of relay systems to radiated electromagnetic interference from transceivers.

IEEE C37.99:2000—IEEE guide for the protection of shunt capacitor banks.

IEEE C37.100:1992—IEEE standard definitions for power switchgear.

IEEE C63.011:2000—Limits and methods of measurement of radio disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment.

IEEE C63.022:1996—Limits and methods of measurement of radio disturbance characteristics of information technology equipment.

IEEE C63.2:1996—Electromagnetic noise and field strength instrumentation, 10 kHz to 40 GHz specifications.

IEEE C63.4:2000—Methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz.

IEEE C63.5:1998—Electromagnetic compatibility—Radiated emission measurements in electromagnetic interference (EMI) control—Calibration of antennas.

IEEE C63.6:1996—Guide for the computation of errors in open-area test site measurements.

IEEE C63.7:1992—Construction of open-area test sites for performing radiated emission measurements.

IEEE C63.12:1999—Recommended practice for electromagnetic compatibility limits.

IEEE C63.13:1991—Guide on the application and evaluation of EMI power-line filters for commercial use.

IEEE C63.14:1998—Dictionary for technologies of electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD).

IEEE C63.17:1998—Methods of measurement of the electromagnetic and operational compatibility of unlicensed personal communications services (UPCS) devices.

IEEE C63.18:1997—Recommended practice for an on-site ad hoc test method for estimating radiated electromagnetic immunity of medical devices to specific radio-frequency transmitters.

IEEE C95:2002—IEEE standard for radio-frequency energy and current flow symbols.

ISO 2315:1994—Two- and four-pole sealed electromagnetic relays, 2 A and 3 A—Clearance and fixing dimensions.

ISO 5066-1:1986—Hermetically sealed monostable electrical relays, 2 A and 3 A—Part 1: Operating characteristics and test conditions.

ISO 5066-2:1986—Hermetically sealed monostable electrical relays, 2 A and 3 A—Part 2: Type approval tests.

ISO 7637-1:2002—Road vehicles—Electrical disturbance by conduction and coupling—Part 1: Passenger cars and light commercial vehicles with nominal 12-V supply voltage—Electrical transient conduction along supply lines only.

ISO 7637-2:1990—Road vehicles—Electrical disturbance by conduction and coupling—Part 2: Commercial vehicles with nominal 24-V supply voltage—Electrical transient conduction along supply lines only.

ISO 7637-3:1995—Road vehicles—Electrical disturbance by conduction and coupling—Part 3: Vehicles with nominal 12-V or 24-V supply voltage—Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines.

ISO 11451-1:2001—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 1: General and definitions.

ISO 11451-2:2001—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 2: Off-vehicle radiation source.

ISO 11451-3:1994—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 3: On-board transmitter simulation.

ISO 11451-4:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 4: Bulk current injector (BCI).

ISO 11452-1:2001—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 1: General and definitions.

ISO 11452-2:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 2: Absorber-lined chamber.

ISO 11452-3:2001—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 3: Transverse electromagnetic mode (TEM) cell.

ISO 11452-4:2001—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 4: Bulk current injection (BCI).

ISO 11452-5:2002—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 5: Strip line.

ISO 11452-6:1997 (R1999)—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 6: Parallel plate antenna.

ISO 11452-7:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 7: Direct radio-frequency (RF) power injection.

ISO 13766:1999—Earth-moving machinery—Electromagnetic compatibility.

ISO 14982:1998—Agricultural and forestry machinery—Electromagnetic compatibility—Test methods and acceptance criteria.

ISO TR 10605:1994—Road vehicles—Electrical disturbances from electrostatic discharges.

ISO TR 11062:1994—Manipulating industrial robots—EMC test methods and performance evaluation criteria—Guidelines.

MIL-A-17161D:1985—Absorber, radio-frequency radiation (microwave-absorbing material), general specification for.

MIL-B-5087—Bonding, electrical, and lightning protection for aerospace systems.

MIL-E-6051E—Electromagnetic compatibility requirements, systems (aircraft and associated weapons systems).

MIL-HDBK-1512:1997—Electroexplosive subsystems, electrically initiated, design requirements, and test methods.

MIL-HDBK-1857:1998—Grounding, bonding, and shielding design practices.

MIL-HDBK-235/1B:2000—Electromagnetic (radiated) environment considerations for design and procurement of electrical and electronic equipment, subsystems, and systems.

MIL-HDBK-237B:1997—Electromagnetic environmental effects on platforms, systems, and equipment.

MIL-HDBK-241B—Design guide for EMI reduction in power supplies.

MIL-HDBK-274(1):1990—Electrical grounding for aircraft safety.

MIL-HDBK-293:1987—Electronic counter-countermeasures considerations in radar systems acquisition.

MIL-HDBK-294:1986—Electronic counter-countermeasures considerations in naval communication systems.

MIL-HDBK-335:1981 (R1992)—Management and design guidance, electromagnetic radiation hardness for air-launched ordnance systems.

MIL-HDBK-419A—Grounding, bonding, and shielding for electronic equipment and facilities.

MIL-HDBK-1857—Grounding, bonding, and shielding design practices.

MIL-STD-220B:2000—Method of insertion-loss measurement.

MIL-STD-285—Method of attenuation measure for enclosures; EM shielding for electronic test purposes.

MIL-STD-449D(1):1976—Measurement of radio-frequency spectrum characteristics.

MIL-STD-461E:1999—Requirements for the control of electromagnetic interference, characteristics of subsystems and equipment.

MIL-STD-463A—Definitions and systems of units, electromagnetic interference and electromagnetic compatibility.

MIL-STD-464A:2002—Electromagnetic environmental effects requirements for systems.

MIL-STD-469B:1996—Radar engineering interface requirements, electromagnetic compatibility metric.

MIL-STD-499D—Measurement of radio frequency spectrum characteristics.

MIL-STD-1310G:1996—Shipboard bonding, grounding, and other techniques for electromagnetic compatibility and safety.

MIL-STD-1377:1971—Effectiveness of cable, connector, and weapon enclosure shielding and filters in precluding hazards of electromagnetic radiation to ordnance, measurement of.

MIL-STD-1385B—General requirements for preclusion of ordnance hazards in EM fields.

MIL-STD-1512—Electroexplosive subsystems, electrically initiated, design requirements and test methods.

MIL-STD-1541A:1987—Electromagnetic compatibility requirements for space systems.

MIL-STD-1542A—EMC grounding requirements for space systems.

MIL-STD-1542B:1991—Electromagnetic compatibility and grounding requirements for space system facilities.

MIL-STD-1605:1973—Procedures for conducting a shipboard electromagnetic interference (EMI) survey (surface ships).

MIL-STD-1757A—Lightning protection of aerospace vehicles and hardware.

MIL-STD-1818A—Electromagnetic effects requirements for systems.

MIL-STD-1857—Grounding, bonding, and shielding design practices.

SAE ARP 936A:2003—Capacitor, 10 µF for EMI measurements.

SAE ARP 958D:2003—Electromagnetic interference measurement antennas—Standard calibration method.

SAE ARP 1172:1972 (R1991)—Filters, conventional, electromagnetic interference reduction, general specification.

SAE ARP 1173:1994—Test procedure to measure the RF shielding characteristics of EMI gaskets.

SAE ARP 1267:1973 (R1991)—Electromagnetic interference measurement impulse generators—Standard calibration requirements and techniques.

SAE ARP 1481A:1998—Corrosion control and electrical conductivity in enclosure design.

SAE ARP 1705:1981 (R1991)—Coaxial test procedure to measure the RF shielding characteristics of EMI gasket materials.

SAE ARP 1870:1987 (R1999)—Aerospace systems electrical bonding and grounding for electromagnetic compatibility and safety.

SAE ARP 1972:1994—Measurement practices and procedures recommended for EMC testing.

SAE ARP 4242:1999—Electromagnetic compatibility control requirements systems.

SAE ARP 4244:1998—Recommended insertion-loss test methods for EMI power-line filters.

SAE ARP 5412:1999—Aircraft lightning environment and related test waveforms.

SAE ARP 5413:1999—Certification of aircraft electrical/electronic systems for the indirect effects of lightning.