European Standards

CISPR 11:1999—Industrial, scientific, and medical (ISM) radio-frequency equipment electromagnetic disturbance characteristics—Limits and methods of measurement.

CISPR 13:1998—Limits and methods of measurement of radio interference characteristics of sound and television broadcast receivers and associated equipment.

CISPR 15:2000—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

CISPR 16-1:1999—Specification for radio disturbance and immunity measuring apparatus and methods—Part 1: Radio disturbance and immunity measuring apparatus.

CISPR 16-2:1999—Specification for radio disturbance and immunity measuring apparatus and methods—Part 2: Methods of measurement of disturbances and immunity; Amendment 1:1999 to CISPR 16-2:1999.

CISPR 17:1981—Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components.

CISPR 18-3:1986—Code of practice for minimizing the generation of radio noise; Amendment A1:1996 to CISPR 18-3:1986.

CISPR 19:1983—Guidance on the use of substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz.

CISPR 20:1999—Sound and television broadcast receivers and associated equipment immunity characteristics—Limits and methods of measurement.

CISPR 21:1999—Interference to mobile radiocommunications in the presence of impulsive noise—Methods of judging degradation and measures to improve performance.

CISPR 22:1997—Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment 1:2000 to CISPR 22:1997.

CISPR 23:1987—Determination of limits for industrial, scientific, and medical equipment.

CISPR 24:1997—Information technology equipment—Immunity characteristics—Limits and methods of measurement.

CISPR 25:1995—Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on-board vehicles.

CISPR 61000-6-3:1996—Electromagnetic compatibility (EMC)—Part 6: Generic standards—Section 3: Emission standard for residential, commercial, and light-industrial environments.

CISPR/TR 16-3:2000—Specification for radio disturbance and immunity measuring apparatus and methods—Part 3: Reports and recommendations of CISPR.

CISPR/TR 28:1997—Industrial, scientific, and medical equipment (ISM)—Guidelines for emission levels within the bands designated by the ITU.

EN 300 127:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Radiated emission testing of physically large telecommunication systems.

EN 300 386:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements.

EN 300 386-2:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard.

EN 301 489-1:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.

EN 301 489-2:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment.

EN 301 489-3:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short-range devices (SRD) operating on frequencies between 9 kHz and 40 GHz.

EN 301 489-4:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services.

EN 301 489-6:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for digital enhanced cordless telecommunications (DECT) equipment.

EN 301 489-7:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS).

EN 301 489-8:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations.

EN 301 489-9:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones and similar radio-frequency (RF) audio link equipment.

EN 301 843-1:2001—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements.

EN 301 843-2:2001—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for radiotelephone transmitters and receivers.

EN 301 843-4:2001—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 4: Specific conditions for narrow-band direct-printing (NBDP) NAVTEX receivers.

EN 50147-1:1996—Anechoic chambers—Part 1: Shield attenuation measurement.

EN 50286:1999—Electrical insulating protective clothing for low-voltage installations.

EN 55011:1998—Industrial, scientific, and medical (ISM) radio-frequency equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:1999 to EN 55011:1998.

EN 55015:1996—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment A1:1997 to EN 55015:1996; Amendment A2:1999 to EN 55015:1996.

EN 55015:2000—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

EN 55022:1994—Limits and methods of measurement of radio disturbance characteristics of information technology equipment; Amendment A1:1995 to EN 55022:1994; Amendment A2:1997 to EN 55022:1994.

EN 55022:1998—Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:2000 to EN 55022:1998.

EN 60076-1:1997—Power transformers—Part 1: General; Amendment A11:1997 to EN 60076-1:1997; Amendment A1:2000 to EN 60076-1:1997.

EN 60143-3:1998—Series capacitors for power systems—Part 3: Internal fuses.

EN 60255-22-3:2000—Electrical relays—Part 22-3: Electrical disturbance tests for measuring relays and protection equipment—Radiated electromagnetic field disturbance tests.

EN 60834-1:1999—Teleprotection equipment of power systems—Performance and testing—Part 1: Command systems.

EN 61000-2-9:1996—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 9: Description of HEMP environment—Radiated disturbance.

EN 61000-4-3:1996—Electromagnetic compatibility (EMC)—Part 4-3: Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test; Amendment A1:1998 to EN 61000-4-3:1996.

EN 61000-4-6:1996—Electromagnetic compatibility (EMC)—Part 4-6: Testing and measurement techniques—Immunity to conducted disturbances induced by radio-frequency fields.

EN 61000-4-7:1993—Electromagnetic compatibility (EMC)—Part 4-7: Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto.

EN 61000-4-8:1993—Electromagnetic compatibility (EMC)—Part 4-8: Testing and measurement techniques—Power frequency magnetic field immunity test.

EN 61000-4-9:1993—Electromagnetic compatibility (EMC)—Part 4-9: Testing and measurement techniques—Pulse magnetic field immunity test.

EN 61000-4-23:2000—Electromagnetic compatibility (EMC)—Part 4-23: Testing and measurement techniques—Test methods for protective devices for HEMP and other radiated disturbances.

EN 61000-4-28:2000—Electromagnetic compatibility (EMC)—Part 4-28: Testing and measurement techniques—Variation of power frequency, immunity test.

EN 61248-3:1997—Transformers and inductors for use in electronic and telecommunication equipment—Part 3: Sectional specification for power transformers on the basis of the capability approval procedure.

EN 61248-4:1997—Transformers and inductors for use in electronic and telecommunication equipment—Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure.

EN 62053-31:1998—Electricity metering equipment (ac)—Particular requirements—Part 31: Pulse output devices for electromechanical and electronic meters (two wires only).

ENV 50091-3:1998—Uninterruptible Power Systems (UPS)—Part 3: Performance requirements and test methods.

ES 201 468:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Additional electromagnetic compatibility (EMC) requirements for telecommunications equipment for enhanced availability of service in specific applications.

ETS 300 127:1994—Equipment engineering (EE); Radiated emission testing of physically large telecommunication systems.

ETS 300 162:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement.

ETS 300 386-1:1994—Equipment engineering (EE); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 1: Product family overview, compliance criteria, and test levels.

HD 349 S1:1977—Preferred diameters of wire terminations of capacitors and resistors.

HD 543.2 S1:1995—Performance and testing of teleprotection equipment of power systems—Part 2: Analogue comparison systems.

HD 625.3 S1:1997—Insulation coordination for equipment within low-voltage systems—Part 3: Use of coatings to achieve insulation coordination of printed board assemblies.

IEC 61000-1-2 TR 2—Electromagnetic compatibility (EMC)—Part 1-2: General—Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena.

IEC 61000-3-3:1994—Electromagnetic compatibility (EMC)—Part 3: Limits—Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current ¾16 A.

IEC 61000-3-11:2000—Electromagnetic compatibility (EMC)—Part 3-11: Limits—Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems—Equipment with rated current ¾75 A and subject to conditional connection.

R014-001:1999—Guide for the evaluation of electromagnetic fields around power transformers.

TR 101 651:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Classification of the electromagnetic environment conditions for equipment in telecommunication networks.

Other Standards

AE4L-81-2:1991—Test waveforms and techniques for assessing the effects of lightning-induced transients.

AIR 1147:1970—Electromagnetic interference on aircraft from jet engine charging.

AIR 1209:1998—Construction and calibration of parallel plate transmission line for electromagnetic interference susceptibility testing.

AIR 1221:1971—Electromagnetic compatibility (EMC) system design checklist.

AIR 1255:1971—Spectrum analyzers for electromagnetic interference measurements.

AIR 1394:1998—Cabling guidelines for electromagnetic compatibility.

AIR 1404:1976—Dc resistivity versus RF impedance of EMI gaskets.

AIR 1423:1977—Electromagnetic compatibility on gas turbine engines for aircraft propulsion.

AIR 1425:1998—Methods of achieving electromagnetic compatibility of gas turbine engine accessories, for self-propelled vehicles.

AIR 1700:1998—Upper frequency measurement boundary for evaluation of shielding effectiveness in cylindrical systems.

ANSI C37.32:1996—American national standard for switchgear—High-voltage air switches, bus supports, and switch accessories—Schedules of preferred ratings, manufacturing specifications, and application guide.

ANSI C37.42:1996—American national standard for switchgear—Distribution cutouts and fuse links—Specifications.

ANSI C37.44:1981 (R1987)—American national standard specifications for distribution oil cutouts and fuse links.

ANSI C37.50:1989—American national standard for switchgear—Low-voltage ac power circuit breakers used in enclosures—Test procedures.

ANSI C37.51:1989—American national standard for switchgear—Metal-enclosed low-voltage ac power circuit-breaker switchgear assemblies—Conformance test procedures.

ANSI C37.52:1974 (R1989)—American national standard test procedures for low-voltage ac power circuit protectors used in enclosures.

ANSI C37.54:1996—American national standard for switchgear—Indoor alternating-current high-voltage circuit breakers applied as removable elements in metal-enclosed switchgear assemblies—Conformance test procedures.

ANSI C37.55:1989—American national standard for switchgear—Metal-clad switchgear assemblies—Conformance test procedures.

ANSI C37.57:1990—American national standard for switchgear—Metal-enclosed interrupter switchgear assemblies—Conformance testing.

ANSI C37.66:1969 (R1988)—American national standard for requirements for oil-filled capacitor switches for alternating-current systems.

ANSI C37.85:1989 (R1998)—American national standard for switchgear—Alternating-current high-voltage power vacuum interrupters—Safety requirements for x-radiation limits.

ANSI C63.011:2000—American national standard for limits and methods of measurement of radio disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment.

ANSI C63.022:1996—American national standard for limits and methods of measurement of radio disturbance characteristics of information technology equipment.

ANSI C63.2:1996—American national standard for electromagnetic noise and field strength instrumentation, 10 kHz to 40 GHz specifications.

ANSI C63.4:2000—Methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 Ghz.

ANSI C63.5:1998—American national standard for electromagnetic compatibility—Radiated emission measurements in electromagnetic interference (EMI) control—Calibration of antennas.

ANSI C63.6:1996—American national standard guide for the computation of errors in open-area test site measurements.

ANSI C63.7:1992—American national standard for construction of open-area test sites for performing radiated emission measurements.

ANSI C63.12:1999—American national standard for recommended practice for electromagnetic compatibility limits.

ANSI C63.13:1991—American national standard guide on the application and evaluation of EMI power-line filters for commercial use.

ANSI C63.14:1998—American national standard dictionary for technologies of electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD).

ANSI C63.17:1998—American national standard for methods of measurement of the electromagnetic and operational compatibility of unlicensed personal communications services (UPCS) devices.

ARP 936:1989—Capacitor, 10 µF for EMI measurements.

ARP 958:1997—Electromagnetic interference measurement antennas—Standard calibration method.

ARP 958D:1999—Electromagnetic interference measurement antennas—Standard calibration method.

ARP 1172:1972—Filters, conventional, electromagnetic interference reduction, general specification.

ARP 1173:1975—Test procedure to measure the RF shielding characteristics of EMI gaskets.

ARP 1267:1973—Electromagnetic interference measurement impulse generators—Standard calibration requirements and techniques.

ARP 1481:1998—Corrosion control and electrical conductivity in enclosure design.

ARP 1705:1981—Coaxial test procedure to measure the RF shielding characteristics of EMI gasket materials.

ARP 1870:1987—Aerospace systems electrical bonding and grounding for electromagnetic compatibility and safety.

ARP 1972:1993—Recommended measurement practices and procedures for EMC testing.

ARP 4242:1999—Electromagnetic compatibility control requirements systems.

ARP 4244:1998—Recommended insertion-loss test methods for EMI power-line filters.

ARP 5412:1999—Aircraft lightning environment and related test waveforms.

ARP 5413:1999—Certification of aircraft electrical/electronic systems for the indirect effects of lightning.

AS 13441:1998—Test methods for electrical connectors.

AS 25064:1999—Conduit, flexible, radio-frequency shielding.

AS 8023:1985—Minimum performance standards for airborne static electric power inverters.

ASTM B904:2000—Standard specification for autocatalytic nickel over autocatalytic copper for electromagnetic interference shielding.

ASTM E1004:1994—Electrical conductivity, using the electromagnetic (eddy-current) method, determining.

IEEE 32:1972 (R1997)—IEEE standard requirements, terminology, and test procedures for neutral grounding devices.

IEEE 81:1994—Earth resistivity, measuring, ground impedance, and earth surface potentials of a ground system.

IEEE 139:1988 (R1999)—IEEE recommended practice for the measurement of radio-frequency emission from industrial, scientific, and medical (ISM) equipment installed on user's premises.

IEEE 140:1990 (R1995)—IEEE recommended practice for minimization of interference from radio-frequency heating equipment.

IEEE 213:1987 (R1998)—IEEE standard procedure for measuring conducted emissions in the range of 300 kHz to 25 MHz from television and FM broadcast receivers to power lines.

IEEE 291:1991—IEEE standard methods for measuring electromagnetic field strength of sinusoidal continuous waves, 30 Hz to 30 GHz.

IEEE 299:1997—IEEE standard for measuring the effectiveness of the electromagnetic shielding enclosure.

IEEE 376:1975 (R1998)—IEEE standard for the measurement of impulse strength and impulse bandwidth.

IEEE 469:1988 (R1994)—IEEE recommended practice for voice-frequency electrical-noise tests of distribution transformers.

IEEE 473:1985 (R1997)—IEEE recommended practice for an electromagnetic site survey (10 kHz to 10 GHz).

IEEE 475:2000—IEEE standard measurement procedure for field-disturbance sensors, 300 MHz to 40 GHz.

IEEE 518:1982 (R1996)—IEEE guide for the installation of electrical equipment to minimize noise inputs to controllers from external sources.

IEEE 539:1990—IEEE standard definitions of terms relating to corona and field effects of overhead power lines.

IEEE 644:1994—IEEE standard procedure for measurement of power frequency electric and magnetic fields from ac power lines.

IEEE 776:1992 (R1998)—IEEE recommended practice for inductive coordination of electric supply and communication lines.

IEEE 824:1994—IEEE standard for series capacitors in power systems.

IEEE 935:1989 (R1995)—IEEE guide on terminology for tools and equipment to be used in live-line working (IEC 743:1983).

IEEE 1036:1992—IEEE guide for application of shunt power capacitors.

IEEE 1048:1990—IEEE guide for protective grounding of power lines.

IEEE 1128:1998—IEEE recommended practice for radio-frequency (RF) absorber evaluation in the range of 30 MHz to 5 GHz.

IEEE 1140:1994 (R1999)—IEEE standard test procedures for the measurement of electric and magnetic fields from video display terminals (VDTs) from 5 Hz to 400 kHz.

IEEE 1247:1998—IEEE standard for interrupter switches for ac, rated above 1000 V.

IEEE 1302:1998—IEEE guide for the electromagnetic characterization of conductive gaskets in the frequency range of dc to 18 GHz (references IEEE 100:1996 and 299:1997).

IEEE 1309:1996—IEEE standard for calibration of electromagnetic field sensors and probes excluding antennas from 9 kHz to 40 GHz.

IEEE 1460:1996—IEEE guide for the measurement of quasi-static magnetic and electric fields.

IEEE C37.04:1999—IEEE standard rating structure for ac high-voltage circuit breakers.

IEEE C37.09:1999—IEEE standard test procedure for ac high-voltage circuit breakers rated on a symmetrical current basis.

IEEE C37.010:1999—IEEE application guide for ac high-voltage circuit breakers rated on a symmetrical current basis.

IEEE C37.083:1999—IEEE guide to synthetic capacitive current-switching test of ac high-voltage circuit breakers.

IEEE C37.14:1999—IEEE standard for low-voltage dc power circuit breakers used in enclosures.

IEEE C37.24:1986 (R1998)—IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear.

IEEE C37.26:1972 (R1996)—IEEE standard guide for methods of power-factor measurement for low-voltage inductive test circuits.

IEEE C37.27:1987 (R1998)—IEEE standard application guide for low-voltage ac nonintegrally fused power circuit breakers (using separately mounted current-limiting fuses).

IEEE C37.30:1997—IEEE standard requirements for high-voltage switches.

IEEE C37.34:1994—IEEE standard test code for high-voltage air switches.

IEEE C37.35:1995—IEEE guide for the application, installation, operation, and maintenance of high-voltage air disconnecting and load interrupter switches.

IEEE C37.36b:1990—IEEE guide to current interruption with horn-gap air switches.

IEEE C37.40:1993—IEEE standard service conditions and definitions for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.

IEEE C37.40b:1996—IEEE standard service conditions and definitions for external fuses for shunt capacitors.

IEEE C37.41:1994—IEEE standard design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.

IEEE C37.41e:1996—IEEE standard design tests for external fuses and shunt capacitors.

IEEE C37.48:1997—IEEE guide for application, operation, and maintenance of high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.

IEEE C37.59:1996—IEEE standard requirements for conversion of power switchgear equipment.

IEEE C37.60:1981 (R1992)—IEEE standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic circuit reclosers and fault interrupters for ac systems.

IEEE C37.61:1973 (R1992)—IEEE standard guide for the application, operation, and maintenance of automatic circuit reclosers.

IEEE C37.63:1997—IEEE standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic line sectionalizers of ac systems (references: IEEE 4:1995, 386:1995, C37.09:1979 [R1988], C37.24:1986 [R1991], C37.100:1992).

IEEE C37.71:1984 (R1990)—IEEE standard for three-phase, manually operated subsurface load interrupting switches for alternating current systems.

IEEE C37.81:1989 (R1999)—IEEE guide for seismic qualification of Class 1E metal-enclosed power switchgear assemblies.

IEEE C37.90.2:1995—IEEE standard withstand capability of relay systems to radiated electromagnetic interference from transceivers.

IEEE C37.99:2000—IEEE guide for the protection of shunt capacitor banks.

IEEE C37.100:1992—IEEE standard definitions for power switchgear.

IEEE C63.14:1995—Dictionary for technologies of electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD).

ISO 2315:1994—Two- and four-pole sealed electromagnetic relays, 2 A and 3 A—Clearance and fixing dimensions.

ISO 5066-1:1994—Hermetically sealed monostable electrical relays, 2 A and 3 A—Part 1: Operating characteristics and test conditions.

ISO 7637-0:1990—Road vehicles—Electrical disturbance by conduction and coupling—Part 0: Definitions and general.

ISO 7637-1:1990—Road vehicles—Electrical disturbance by conduction and coupling—Part 1: Passenger cars and light commercial vehicles with nominal 12-V supply voltage—Electrical transient conduction along supply lines only.

ISO 7637-2:1990—Road vehicles—Electrical disturbance by conduction and coupling—Part 2: Commercial vehicles with nominal 24-V supply voltage—Electrical transient conduction along supply lines only.

ISO 7637-3:1995—Road vehicles—Electrical disturbance by conduction and coupling—Part 3: Vehicles with nominal 12-V or 24-V supply voltage—Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines.

ISO 11451-1:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 1: General and definitions.

ISO 11451-2:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 2: Off-vehicle radiation source.

ISO 11451-3:1994—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 3: On-board transmitter simulation.

ISO 11451-4:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Vehicle test methods—Part 4: Bulk current injector (BCI).

ISO 11452-1:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 1: General and definitions.

ISO 11452-2:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 2: Absorber-lined chamber.

ISO 11452-3:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 3: Transverse electromagnetic mode (TEM) cell.

ISO 11452-4:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 4: Bulk current injection (BCI).

ISO 11452-5:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 5: Strip line.

ISO 11452-6:1997—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 6: Parallel plate antenna.

ISO 11452-7:1995—Road vehicles—Electrical disturbances by narrow-band radiated electromagnetic energy—Component test methods—Part 7: Direct radio-frequency (RF) power injection.

ISO 14982:1998—Agricultural and forestry machinery—Electromagnetic compatibility—Test methods and acceptance criteria.

ISO TR 10605:1994—Road vehicles—Electrical disturbances from electrostatic discharges.

ISO TR 11062:1994—Manipulating industrial robots—EMC test methods and performance evaluation criteria—Guidelines.

MIL-A-17161D:1985—Absorber, radio-frequency radiation (microwave-absorbing material), general specification for.

MIL-HDBK-1512:1997—Electroexplosive subsystems, electrically initiated, design requirements and test methods.

MIL-HDBK-1857:1998—Grounding, bonding, and shielding design practices.

MIL-HDBK-235/1B NOT 1:2000—Electromagnetic (radiated) environment considerations for design and procurement of electrical and electronic equipment, subsystems, and systems.

MIL-HDBK-237B:1997—Electromagnetic environmental effects on platforms, systems, and equipment.

MIL-HDBK-274(1):1990—Electrical grounding for aircraft safety.

MIL-HDBK-294:1986—Electronic counter-countermeasures considerations in naval communication systems.

MIL-HDBK-335 NOT 2:1992—Management and design guidance, electromagnetic radiation hardness for air-launched ordnance systems.

MIL-STD-1377:1971—Effectiveness of cable, connector, and weapon enclosure shielding and filters in precluding hazards of electromagnetic radiation to ordnance, measurement of.

MIL-STD-1541A:1987—Electromagnetic compatibility requirements for space systems.

MIL-STD-1542B:1991—Electromagnetic compatibility and grounding requirements for space system facilities.

MIL-STD-1605:1973—Procedures for conducting a shipboard electromagnetic interference (EMI) survey (surface ships).

MIL-STD-220B:2000—Method of insertion-loss measurement.

MIL-STD-461E:1999—Requirements for the control of electromagnetic interference characteristics of subsystems and equipment.

MIL-STD-464:1997—Electromagnetic environmental effects requirements for systems.

MIL-STD-469B:1996—Radar engineering interface requirements, electromagnetic compatibility metric.

SAE-ARP1173:1994—Test procedure to measure the RF shielding characteristics of EMI gaskets.