 
|
  
   |
| About
CE-Mag Free Subscriptions Current Issue Article Archives ESD Help Mr. Static Web Gallery Staff Info Contact us
|
|
|
|
|
EMC StandardsThe following list details some of the major electromagnetic compatibility (EMC) standards in place worldwide. EMC Directive Standards Harmonized standards for the implementation of the Council Directive 89/336/EEC (2000/C 359/02). CENELEC EN 50065-1:1991—Signaling on low-voltage electrical installations in the frequency range 3 to 148.5 kHz—Part 1: General requirements, frequency bands and electromagnetic disturbances; Amendment A1:1992 to EN 50065-1:1991; Amendment A2:1995 to EN 50065-1:1991; Amendment A3:1996 to EN 50065-1:1991. EN 50081-1:1992—Electromagnetic compatibility—Generic emission standard—Part 1: Residential, commercial, and light industry. EN 50081-2:1993—Electromagnetic compatibility—Generic emission standard—Part 2: Industrial environment. EN 50082-1:1997—Electromagnetic compatibility—Generic immunity standard—Part 1: Residential, commercial, and light industry. EN 50082-2:1995—Electromagnetic compatibility—Generic immunity standard—Part 2: Industrial environment. EN 50083-2:1995—Cabled networks for television signals, sound signals, and interactive services—Part 2: Electromagnetic compatibility for equipment; Amendment A1:1997 to EN 50083-2:1995. EN 50090-2-2:1996—Home and building electronic systems (HBES)—Part 2-2: System overview—General technical requirements. EN 50091-2:1995—Uninterruptible power systems (UPS)—Part 2: EMC requirements. EN 50130-4:1995—Alarm systems—Part 4: Electromagnetic compatibility—Product family standard: Immunity requirements for components of fire, intruder, and social alarm systems; Amendment A1:1998 to EN 50130-4:1995. EN 50148:1995—Electronic taximeters. EN 50199:1995—Electromagnetic compatibility (EMC)—Product standard for arc welding equipment. EN 50227:1997—Control circuit devices and switching elements, proximity sensors, dc interface for proximity sensors and switching amplifiers (NAMUR). EN 50263:1999—Electromagnetic compatibility (EMC)—Product standard for measuring relays and protection equipment. EN 50270:1999—Electromagnetic compatibility—Electrical apparatus for the detection and measurement of combustible gases, toxic gases, or oxygen. EN 55011:1991—Limits and methods of measurement of radio disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment; Amendment A2:1996 to EN 55011:1991; Amendment A1:1997 to EN 55011:1991. EN 55011:1998—Industrial, scientific, and medical (ISM) radio-frequency equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:1999 to EN 55011:1998. EN 55013:1990—Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment; Amendment A12:1994 to EN 55013:1990; Amendment A13:1996 to EN 55013:1990; Amendment A14:1999 to EN 55013:1990. EN 55014-1:1993—Electromagnetic compatibility—Requirements for household appliances, electric tools, and similar apparatus—Part 1: Emission—Product family standard; Amendment A1:1997 to EN 55014-1:1993; Amendment A2:1999 to EN 55014-1:1993. EN 55014-2:1997—Electromagnetic compatibility—Requirements for household appliances, electric tools, and similar apparatus—Part 2: Immunity—Product family standard. EN 55015:1996—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment A1:1997 to EN 55015:1996; Amendment A2:1999 to EN 55015:1996. EN 55020:1994—Electromagnetic immunity of broadcast receivers and associated equipment; Amendment A11:1996 to EN 55020:1994; Amendment A12:1999 to EN 55020:1994; Amendment A13:1999 to EN 55020:1994; Amendment A14:1999 to EN 55020:1994. EN 55022:1994—Limits and methods of measurement of radio disturbance characteristics of information technology equipment; Amendment A1:1995 to EN 55022:1994; Amendment A2:1997 to EN 55022:1994. EN 55022:1998—Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement; Amendment A1:2000 to EN 55022:1998. EN 55024:1998—Information technology equipment—Immunity characteristics—Limits and methods of measurement; Amendment A1:2001 to EN 55024:1998. EN 55103-1:1996—Electromagnetic compatibility—Product family standard for audio, video, audiovisual, and entertainment lighting control apparatus for professional use—Part 1: Emission. EN 55103-2:1996—Electromagnetic compatibility—Product family standard for audio, video, audiovisual, and entertainment lighting control apparatus for professional use—Part 2: Immunity. EN 55104:1995—Electromagnetic compatibility—Immunity requirements for household appliances, tools, and similar apparatus—Product family standard. EN 60204-31:1998—Safety of machinery—Electrical equipment of machines—Part 31: Particular safety and EMC requirements for sewing machines, units, and systems. EN 60439-1:1994—Low-voltage switch gear and control gear assemblies—Part 1: Type-tested and partially type-tested assemblies; Amendment A11:1996 to EN 60439-1:1994. EN 60439-1:1999—Low-voltage switch gear and control gear assemblies—Part 1: Type-tested and partially type-tested assemblies. EN 60521:1995—Class 0.5, 1, and 2 alternating-current watt-hour meters. EN 60555-2:1987—Disturbances in supply systems caused by household appliances and similar electrical equipment—Part 2: Harmonics. EN 60555-3:1987—Disturbances in supply systems caused by household appliances and similar electrical equipment—Part 3: Voltage fluctuations; Amendment A1:1991 to EN 60555-3:1987. EN 60669-2-1:1996—Switches for household and similar fixed electrical installations—Part 2: Particular requirements—Section 1: Electronic switches; Amendment A11:1997 to EN 60669-2-1:1996. EN 60669-2-2:1997—Switches for household and similar fixed electrical installations—Part 2: Particular requirements—Section 2: Electromagnetic remote-control switches (RCS). EN 60669-2-3:1997—Switches for household and similar fixed electrical installations—Part 2-3: Particular requirements—Time-delay switches (TDS). EN 60687:1992—Alternating current static watt-hour meters for active energy (classes 0.2 S and 0.5 S). EN 60730-1:1995—Automatic electrical controls for household and similar use—Part 1: General requirements; Amendment A11:1996 to EN 60730-1:1995; Amendment A17:2000 to EN 60730-1:1995. EN 60730-2-5:1995—Automatic electrical controls for household and similar use—Part 2: Particular requirements for automatic electrical burner control systems. EN 60730-2-6:1995—Automatic electrical controls for household and similar use—Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements; Amendment A1:1997 to EN 60730-2-6:1995. EN 60730-2-7:1991—Automatic electrical controls for household and similar use—Part 2: Particular requirements for timers and time switches; Amendment A1:1997 to EN 60730-2-7:1991. EN 60730-2-8:1995—Automatic electrical controls for household and similar use—Part 2: Particular requirements for electrically operated water valves, including mechanical requirements; Amendment A2:1997 to EN 60730-2-8:1995; Amendment A1:1997 to EN 60730-2-8:1995. EN 60730-2-9:1995—Automatic electrical controls for household and similar use—Part 2: Particular requirements for temperature sensing controls; Amendment A1:1996 to EN 60730-2-9:1995; Amendment A2:1997 to EN 60730-2-9:1995. EN 60730-2-11:1993—Automatic electrical controls for household and similar use—Part 2: Particular requirements for energy regulators; Amendment A1:1997 to EN 60730-2-11:1993. EN 60730-2-13:1998—Automatic electrical controls for household and similar use—Part 2: Particular requirements for humidity sensing controls. EN 60730-2-14:1997—Automatic electrical controls for household and similar use—Part 2: Particular requirements for electric actuators. EN 60730-2-18:1999—Automatic electrical controls for household and similar use—Part 2: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements. EN 60870-2-1:1996—Telecontrol equipment and systems—Part 2: Operating conditions—Section 1: Power supply and electromagnetic compatibility. EN 60945:1997—Maritime navigation and radiocommunication equipment and systems—General requirements—Methods of testing and required test results. EN 60947-1:1997—Low-voltage switch gear and control gear—Part 1: General rules. EN 60947-1:1999—Low-voltage switch gear and control gear—Part 1: General rules. EN 60947-2:1996—Low-voltage switch gear and control gear—Part 2: Circuit breakers; Amendment A1:1997 to EN 60947-2:1996. EN 60947-3:1992—Low-voltage switch gear and control gear—Part 3: Switches, disconnectors, switch-disconnectors, and fuse-combination units; Amendment A1:1995 to EN 60947-3:1992. EN 60947-3:1999—Low-voltage switch gear and control gear—Part 3: Switches, disconnectors, switch-disconnectors, and fuse-combination units. EN 60947-4-1:1992—Low-voltage switch gear and control gear—Part 4-1: Contactors and motor starters—Electromechanical contactors and motor starters; Amendment A2:1997 to EN 60947-4-1:1992. EN 60947-4-2:1996—Low-voltage switch gear and control gear—Part 4: Contactors and motor starters—Section 2: Ac semiconductor motor controllers and starters; Amendment A2:1998 to EN 60947-4-2:1996. EN 60947-4-2:2000—Low-voltage switch gear and control gear—Part 4-2: Contactors and motor starters—Ac semiconductor motor controllers and starters. EN 60947-4-3:2000—Low-voltage switch gear and control gear—Part 4-3: Contactors and motor starters—Ac semiconductor controllers and contactors for nonmotor loads. EN 60947-5-1:1991—Low-voltage switch gear and control gear—Part 5: Control circuit devices and switching elements—Section 1: Electromechanical control circuit devices; Amendment A12:1997 to EN 60947-5-1:1991. EN 60947-5-1:1997—Low-voltage switch gear and control gear—Part 5-1: Control circuit devices and switching elements—Electromechanical control circuit devices; Amendment A12:1999 to EN 60947-5-1:1997. EN 60947-5-2:1997—Low-voltage switch gear and control gear—Part 5: Control circuit devices and switching elements—Section 2: Proximity switches. EN 60947-5-2:1998—Low-voltage switch gear and control gear—Part 5-2: Control circuit devices and switching elements—Proximity switches. EN 60947-5-3:1999—Low-voltage switch gear and control gear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behavior under fault conditions (PDF). EN 60947-5-6:2000—Low-voltage switch gear and control gear—Part 5-6: Control circuit devices and switching elements—Dc interface for proximity sensors and switching amplifiers (NAMUR). EN 60947-6-1:1991—Low-voltage switch gear and control gear—Part 6-1: Multiple-function equipment—Automatic transfer switching equipment; Amendment A2:1997 to EN 60947-6-1:1991. EN 60947-6-2:1993—Low-voltage switch gear and control gear—Part 6-2: Multiple-function equipment—Control and protective switching devices (or equipment) (CPS); Amendment A1:1997 to EN 60947-6-2:1993. EN 61000-3-2:1995—Electromagnetic compatibility (EMC)—Part 3-2: Limits—Limits for harmonic current emissions (equipment input current up to and including 16 A per phase); Amendment A1:1998 to EN 61000-3-2:1995; Amendment A2:1998 to EN 61000-3-2:1995; Amendment A14:2000 to EN 61000-3-2:1995. EN 61000-3-2:2000—Electromagnetic compatibility (EMC)—Part 3-2: Limits—Limits for harmonic current emissions (equipment input current up to and including 16 A per phase). EN 61000-3-3:1995—Electromagnetic compatibility (EMC)—Part 3-3: Limits—Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current ¾16 A per phase and not subject to conditional connection; Amendment A1:2001 to EN 61000-3-3:1995. EN 61000-3-11:2000—Electromagnetic compatibility (EMC)—Part 3-11: Limits—Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems—Equipment with rated current ¾75 A and subject to conditional connection. EN 61000-6-1:2001—Electromagnetic compatibility (EMC)—Part 6-1: Generic standards—Immunity for residential, commercial and light-industrial environments. EN 61000-6-2:2001—Electromagnetic compatibility (EMC)—Part 6-2: Generic standards—Immunity for industrial environments. EN 61000-6-3:2001—Electromagnetic compatibility (EMC)—Part 6-3: Generic standards—Emission standard for residential, commercial and light-industrial environments. EN 61000-6-4:2001—Electromagnetic compatibility (EMC)—Part 6-4: Generic standards—Emission standard for industrial environments. EN 61008-1:1994—Electrical accessories—Residual current–operated circuit breakers (RCCBs) without integral overcurrent protection for household and similar uses—Part 1: General rules; Amendment A2:1995 to EN 61008-1:1994; Amendment A14:1998 to EN 61008-1:1994. EN 61009-1:1994—Electrical accessories—Residual current–operated circuit breakers (RCCBs) with integral overcurrent protection for household and similar uses—Part 1: General rules; Amendment A1:1995 to EN 61009-1:1994; Amendment A14:1998 to EN 61009-1:1994. EN 61036:1996—Alternating current static watt-hour meters for active energy (classes 1 and 2); Amendment A1:2000 to EN 61036:1996. EN 61037:1992—Electricity metering—Tariff and load control—Particular requirements for electronic ripple control receivers; Amendment A1:1996 to EN 61037:1992; Amendment A2:1998 to EN 61037:1992. EN 61038:1992—Electricity metering—Tariff and load control—Particular requirements for time switches; Amendment A1:1996 to EN 61038:1992; Amendment A2:1998 to EN 61038:1992. EN 61131-2:1994—Programmable controllers—Part 2: Equipment requirements and tests; Amendment A11:1996 to EN 61131-2:1994; Amendment A12:2000 to EN 61131-2:1994. EN 61204-3:2000—Low-voltage power supplies, dc output—Part 3: Electromagnetic compatibility (EMC); Amendment A11:1996 to EN 61131-2:1994. EN 61268:1996—Alternating current static var-hour meters for reactive energy (Classes 2 and 3). EN 61326:1997—Electrical equipment for measurement, control, and laboratory use—EMC requirements; Amendment A1:1998 to EN 61326:1997. EN 61543:1995—Residual current–operated protective devices (RCDs) for household and similar use—Electromagnetic compatibility. EN 61547:1995—Equipment for general lighting purposes—EMC immunity requirements. EN 61800-3:1996—Adjustable speed electrical power drive systems—Part 3: EMC product standard including specific test methods; Amendment A11:2000 to EN 61800-3:1996. EN 61812-1:1996—Specified time relays for industrial use—Part 1: Requirements and tests; Amendment A11:1999 to EN 61812-1:1996. CEN EN 12015:1998—Electromagnetic compatibility—Product family standard for lifts, escalators, and passenger conveyors—Emission. EN 12016:1998—Electromagnetic compatibility—Product family standard for lifts, escalators, and passenger conveyors—Immunity. EN ISO 14982:1998—Agricultural and forestry machines—Electromagnetic compatibility—Test methods and acceptance criteria (ISO 14982:1998).
ETSI EN 300 065-2 V1.1.1 (04-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive. EN 300 065-3 V1.1.1 (04-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 3: Harmonized EN covering essential requirements of Article 3(3)(e) of the R&TTE Directive. EN 300 086-2 V1.2.1 (02-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. EN 300 113-2 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. EN 300 135-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Angle-modulated citizens band radio equipment (CEPT PR 27 Radio Equipment); Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. EN 300 152-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 2: Harmonized R&TTE Directive. EN 300 152-3 V1.1.1 (04-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 3: Harmonized EN under Article 3(3)(e) of the R&TTE Directive. EN 300 162-2 V1.1.2 (12-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. EN 300 162-3 V1.1.1 (04-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 3: Harmonized EN covering essential requirements under Article 3(3)(e) of the R&TTE Directive. ETS 300 197/A2:1997—Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 38 GHz. ETS 300 198/A1:1997—Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 23 GHz. EN 300 219-2 V1.1.1 (03-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. EN 300 220-1:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices; Technical characteristics and test methods for radio equipment to be used in the 25 to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Parameters intended for regulatory purposes. EN 300 220-3 V1.1.1 (09-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. ETS 300 224:1998—Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Technical and functional characteristics for on-site paging systems, including test methods. EN 300 224-2 V1.1.1 (01-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. EN 300 279:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech). ETS 300 279/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech). ETS 300 296/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using integral antennas intended primarily for analog speech. EN 300 296-2 V1.1.1 (02-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment using integral antennas intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. ETS 300 328/A1:1997—Radio equipment and systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques. EN 300 328-2 V1.2.1 (11-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. ETS 300 329:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for digital enhanced cordless telecommunications (DECT) equipment. EN 300 330-2 V1.1.1 (06-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. EN 300 339:1998—Electromagnetic compatibility and radio spectrum matters (ERM); General electromagnetic compatibility (EMC) for radio communications equipment. ETS 300 340/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European radio message system (ERMES) paging receivers. ETS 300 341/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver. EN 300 341-2 V1.1.1 (11-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. ETS 300 342-1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European digital cellular telecommunications system (GSM 900 MHz and DCS 1800 MHz); Part 1: Mobile and portable radio and ancillary equipment. ETS 300 384/A1:1997—Radio broadcasting systems; Very high frequency (VHF), frequency modulated, sound broadcasting transmitters. EN 300 385:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment. EN 300 385/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment with data rates at around 2 Mbit/sec and above. EN 300 386:2000—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements. EN 300 386-2:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard. ETS 300 390/A1:1997—Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and using an integral antenna. EN 300 390-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. EN 300 422-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. ETS 300 433/A2:1997—Radio equipment and systems (RES); Double-sideband (DSB) and/or single-sideband (SSB) amplitude modulated citizens band (CB) radio equipment; Technical characteristics and methods of measurement. EN 300 433-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Double side band (DSB) and/or Single side band (SSB) Amplitude modulated citizens band radio equipment; Part 2: Harmonized EN covering essential requirements under Article 3(2) of the R&TTE Directive. EN 300 440-2 V1.1.1 (09-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. ETS 300 445/A1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for wireless microphones and similar radio-frequency (RF) audio link equipment. ETS 300 446:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for second-generation cordless telephone (CT2) apparatus operating in the frequency band 864.1 to 868.1 MHz, including public access services. ETS 300 447:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for VHF FM broadcasting transmitters. ETS 300 454/A1:1997—Radio equipment and systems (RES); Wideband audio links; Technical characteristics and test methods. EN 300 454-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Wide band audio links; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. ETS 300 460/A1:1997—Satellite earth stations and systems (SES); Maritime mobile earth stations (MMESs) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDCs) for the global maritime distress and safety system (GMDSS); Technical characteristics and methods of measurement. ETS 300 487/A1:1997—Satellite earth stations and systems (SES); Receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications; Radio-frequency (RF) specifications. ETS 300 673:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for 4/6 GHz and 11/12/14 GHz very small aperture terminal (VSAT) equipment and 11/12/13/14 GHz satellite news gathering (SNG) transportable earth station (TES) equipment. ETS 300 680-1:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for citizens band (CB) radio and ancillary equipment (speech and/or non-speech); Part 1: Angle modulated. ETS 300 680-2:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for citizens band (CB) radio and ancillary equipment (speech and/or non-speech); Part 2: Double sideband (DSB) and/or single sideband (SSB). ETS 300 682:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for on-site paging equipment. ETS 300 683:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for short-range devices (SRD) operating on frequencies between 9 kHz and 25 GHz. ETS 300 684:1997—Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for commercially available amateur radio equipment. ETS 300 717:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for analog cellular radio communications equipment; Mobile and portable equipment. ETS 300 719-1:1997—Radio equipment and systems (RES); Private wide-area paging service; Part 1: Technical characteristics for private wide-area paging system. ETS 300 741:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for wide-area paging equipment. ETS 300 826:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for 2.4 GHz wideband transmission systems and high-performance radio local-area network (HIPERLAN) equipment. EN 300 827:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for terrestrial trunked radio (TETRA) and ancillary equipment. EN 300 828:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands. EN 300 829:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime mobile earth stations (MMES) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDC) for the global maritime distress and safety system (GMDSS). ETS 300 830:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications. EN 300 831:1999—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for mobile earth stations (MES) used within satellite personal communications networks (S-PCN) operating in the 1.5/1.6/2.4 GHz and 2 GHz frequency bands. EN 301 011:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for narrow-band direct-printing (NBDP) Navtex receivers operating in the maritime mobile service. EN 301 025-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. EN 301 025-3 V1.1.1 (04-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 3: Harmonized EN under Article 3(3)(e) of the R&TTE Directive. EN 301 090:1998—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime radiotelephone watch receivers operating on 2182 kHz. EN 301 178-2 V1.1.1 (07-2000)—Electromagnetic compatibility and radio spectrum matters (ERM); Portable very high frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. EN 301 357-2 V1.2.1 (06-2001)—Electromagnetic compatibility and radio spectrum matters (ERM); Cordless audio devices in the range 25 MHz to 2000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive. Australian Standards AS/NZS 1044:1995—Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and similar electric apparatus; Amendment 1:1997 to AS/NZS 1044:1995; Amendment 2:2000 to AS/NZS 1044:1995. AS/NZS 1053—Limits and methods of measurement of radio interference characteristics of sound and television receivers and associated equipment. AS/NZS 2064:1997—Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment; Amendment 1:1997 to AS/NZS 2064:1997. AS/NZS 2557—Limits and methods of measurement of radio interference characteristics of vehicles, motor boats, and spark-ignited engine driven vehicles. AS/NZS 3548:1995—Limits and methods of measurement of radio disturbance characteristics of information technology equipment; Amendment 1:1997 to AS/NZS 3548:1995; Amendment 2:1997 to AS/NZS 3548:1995. AS/NZS 3652—Electromagnetic compatibility—Arc welding equipment. AS/NZS 4051:1998—Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. AS/NZS 4251.1:1999—Electromagnetic compatibility (EMC)—Generic emission standard—Residential, commercial and light industry. AS/NZS 4251.2: 1999—Electromagnetic compatibility (EMC)—Generic emission standard—Industrial environments. AS 62040.2—Uninterruptible power systems—Electromagnetic compatibility (EMC) requirements. Canadian Standards C108.1.1:1977—Electromagnetic interference measuring instrument—CISPR type. C108.1.2:M1981—Electromagnetic interference measuring instrument—ANSI type. C108.8:M1983 (R1989) (R1994)—Limits and methods of measurement of electromagnetic emissions from data processing equipment and electronic office machines. CAN/CSA-C108.4:M1992—Limits and methods of measurement of radio interference characteristics of vehicles, motor boats, and spark-ignited engine-driven devices. CAN/CSA-C108.6:M1991 (R1994)—Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment (adopted CISPR 11:1990). CAN/CSA-C108.9:M1991 (R1999)—Sound and television broadcasting receivers and associated equipment—limits and methods of measurement of immunity characteristics. CAN/CSA-CEI/IEC 1000-1-1:1997—Electromagnetic compatibility (EMC)—Part 1: General—Section 1: Application and interpretation of fundamental definitions and terms (adopted CEI/IEC 1000-1-1:1992). CAN/CSA-CEI/IEC 1000-2-1:1997—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 1: Description of the environment—Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems (adopted CEI/IEC 1000-2-1:1990). CAN/CSA-CISPR 22:1996—Limits and methods of measurement of radio disturbance characteristics of information technology equipment (adopted CISPR 22:1993). CAN/CSA-E1000-2-2:1997—Electromagnetic compatibility (EMC)—Part 2: Environment—Section 2: Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (adopted CEI/IEC 1000-2-2:1990). CAN3-C108.1.5-M1985—Line impedance stabilization network (LISN). CAN3-C108.3.1-M1984 (R1993)—Limits and measurement methods of electromagnetic noise from ac power systems, 0.15–30 MHz. |