|
Product Safety Standards
The following list is a sampling of product safety standards in
the United States and Europe.
ANSI C95.3:1972—Techniques
and instrumentation for the measurement of potentially hazardous electromagnetic
radiation at microwave frequencies.
ANSI N2.1:1994—Warning
symbols—Radiation symbol.
ANSI N43.3:1993—General
radiation safety—Installations using nonmedical x-ray and sealed
gamma-ray sources, energies up to 10 MeV.
ANSI/ISA RP12.6:1995—Wiring
practices for hazardous (classified) locations instrumentation—Part
I: Intrinsic safety.
ANSI/ISA S82.01:1994—Safety
standard for electrical and electronic test, measuring, controlling,
and related equipment—General requirements.
ANSI/ISA S82.02.02:1996—Safety
requirements for electrical equipment for measurement, control, and
laboratory use.
ANSI/ISA S82.02.04:1996—Safety
requirements for electrical equipment for measurement, control, and
laboratory use.
ANSI/ISA S82.03:1988—Safety
standard for electrical and electronic test, measuring, controlling,
and related equipment—Electrical and electronic process measurement
and control equipment.
ANSI/SPI B151.21:2000—Safety
requirements for the construction, care, and use of injection blow molding
machines.
ASAE S441.2:1995—Safety
signs.
ASAE S441.3:1999—Safety
signs.
EN 81-1—Safety rules
for the construction and installation of lifts—Part 1: Electric
lifts.
EN 81-2—Safety rules
for the construction and installation of lifts—Part 2: Hydraulic
lifts.
EN 201—Rubber and
plastics machines—Injection-moulding machines—Safety requirements.
EN 474-1—Earth-moving
machinery—Safety—Part 1: General requirements; Amendment A1
to EN 474-1.
EN 474-2—Earth-moving
machinery—Safety—Part 2: Requirements for tractor-dozers.
EN 474-3—Earth-moving
machinery—Safety—Part 3: Requirements for loaders.
EN 474-4—Earth-moving
machinery—Safety—Part 4: Requirements for backhoe loaders.
EN 500-1—Mobile construction
machinery—Safety—Part 1: Common requirements.
EN 500-2—Mobile construction
machinery—Safety—Part 2: Specific requirements for road-milling
machines.
EN 500-3—Mobile construction
machinery—Safety—Part 3: Specific requirements for soil stabilization
machines.
EN 500-4—Mobile construction
machinery—Safety—Part 4: Specific requirements for compaction
machines.
EN 500-5—Mobile construction
machinery—Safety—Part 5: Specific requirements for joint cutters.
EN 528—Rail-dependent
storage and retrieval equipment—Safety.
EN 536—Road construction
machines—Asphalt mixing plants—Safety requirements.
EN 563—Safety of machinery—Temperatures
of touchable surfaces—Ergonomics data to establish temperature
limit values for hot surfaces.
EN 574—Safety of machinery—Two-hand
control devices—Functional aspects—Principles for design.
EN 609-1—Agricultural
and forestry machinery—Safety of log splitters—Part 1: Wedge
splitters.
EN 614-1—Safety of
machinery—Ergonomic design principles—Part 1: Terminology
and general principles.
EN 626-1—Safety of
machinery—Reduction of risks to health from hazardous substances
emitted by machinery—Part 1: Principles and specifications for
machinery manufactures.
EN 626-2—Safety of
machinery—Reduction of risk to health from hazardous substances
emitted by machinery—Part 2: Methodology leading to verification
procedures.
EN 632—Agricultural
machinery—Combine harvesters and forage harvesters—Safety.
EN 690—Agricultural
machinery—Manure spreaders—Safety.
EN 692—Mechanical
presses—Safety.
EN 703—Agricultural
machinery—Silage cutter—Safety.
EN 704—Agricultural
machinery—Pick-up balers—Safety.
EN 706—Agricultural
machinery—Vine shoot tipping machines—Safety.
EN 707—Agricultural
machinery—Slurry tankers—Safety.
EN 708—Agricultural
machinery—Soil working machines with powered tools—Safety.
EN 709—Agricultural
and forestry machinery—Pedestrian-controlled tractors with mounted
rotary cultivators, motor hoes, motor hoes with drive wheel(s)—Safety.
EN 710—Safety requirements
for foundry moulding and core-making machinery and plant and associated
equipment.
EN 730—Gas welding
equipment—Equipment used in gas welding, cutting, and allied processes,
safety devices for fuel gases and oxygen or compressed air—General
specifications, requirements, and tests.
EN 745—Agricultural
machinery—Rotary mowers and flail-mowers—Safety.
EN 746-2—Industrial
thermoprocessing equipment—Part 2: Safety requirements for combustion
and fuel handling systems
EN 746-3—Industrial
thermoprocessing equipment—Part 3: Safety requirements for the
generation and use of atmospheric gases.
EN 774—Garden equipment—Handheld,
integrally powered hedge trimmers—Safety; Amendment A1 to EN 774;
Amendment A2 to EN 774.
EN 777-4—Multiburner
gas-fired overhead radiant tube heater systems for nondomestic use—Part
4: System H—Safety.
EN 786—Garden equipment—Electrically
powered walk-behind and handheld lawn trimmers and lawn edge trimmers—Mechanical
safety.
EN 793—Particular
requirements for safety of medical supply units.
EN 809—Pumps and pump
units for liquids—Common safety requirements.
EN 818-1—Short link
chain for lifting purposes—Safety—Part 1: General conditions
of acceptance.
EN 818-2—Short link
chain for lifting purposes—Safety—Part 2: Medium tolerance
chain for chain slings—Grade 8.
EN 818-3—Short link
chain for lifting purposes—Safety—Part 3: Medium tolerance
chain for chain—slings—Grade 4.
EN 818-4—Short link
chain for lifting purposes—Safety—Part 4: Chain slings—Grade
8.
EN 818-5—Short link
chain for lifting purposes—Safety—Part 5: Chain slings—Grade
4.
EN 836—Garden equipment—Powered
lawnmowers—Safety; Amendment A1 to EN 836.
EN 847-1—Tools for
woodworking—Safety requirements—Part 1: Milling tools and
circular saw blades.
EN 848-2—Safety of
woodworking machines—One-side molding machines with rotating tool—Part
2: Single-spindle hand-fed and integrated-fed routing machines.
EN 860—Safety of woodworking
machines—One-side thickness planing machines.
EN 869—Safety requirements
for high-pressure metal die-casting units.
EN 907—Agricultural
and forestry machinery—Sprayers and liquid fertilizer distributors—Safety.
EN 908—Agricultural
and forestry machinery—Reel machines for irrigation—Safety.
EN 909—Agricultural
and forestry machinery—Center pivot and moving lateral types—Irrigation
machines—Safety.
EN 940—Safety of woodworking
machines—Combined woodworking machines.
EN 953—Safety of machinery—General
requirements for the design and construction of fixed and movable guards.
EN 954-1—Safety of
machinery—Safety-related parts of control systems—Part 1:
General principles for design.
EN 957-1—Stationary
training equipment—Part 1: General safety requirements and test
methods; Amendment A1:1998 to EN 957-1.
EN 982—Safety of machinery—Safety
requirements for fluid power systems and their components—Hydraulics.
EN 983—Safety of machinery—Safety
requirements for fluid power systems and their components—Pneumatics.
EN 996—Piling equipment—Safety
requirements.
EN 999—Safety of machinery—The
positioning of protective equipment with respect to approach speeds
of machine parts toward the human body.
EN 1070—Safety of
machinery—Terminology.
EN 1987-1—Electrically
propelled road vehicles—Specific requirements for safety—Part
1: On-board energy storage.
EN 1987-2—Electrically propelled
road vehicles—Specific requirements for safety—Part 2: Functional
safety means and protection against failures.
EN 1987-3—Electrically
propelled road vehicles—Specific requirements for safety—Part
3: Protection of users against electrical hazards.
EN 12547—Centrifuges—Common
safety requirements.
EN 12626—Safety of
machinery—Laser processing machines—Safety requirements (ISO
11553:1996, modified).
EN 41003:1998—Particular
safety requirements for equipment to be connected to telecommunications
networks.
EN 45502-1—Active
implantable medical devices—Part 1: General requirements for safety,
marking, and information to be provided by the manufacturer.
EN 50019—Electrical
apparatus for potentially explosive atmospheres—Increased safety
"e."
EN 50020—Electrical
apparatus for potentially explosive atmospheres—Intrinsic safety
"i."
EN 50061/A1—Medical
electrical equipment—Safety of implantable cardiac pacemakers.
EN 50063:1989—Safety
requirements for the construction and installation of equipment for
resistance welding and allied processes.
EN 50065-1:1991—Signaling
on low-voltage electrical installations in the frequency range of 3
kHz to 148.5 kHz—Part 1: General requirements, frequency bands,
and electromagnetic disturbances; Amendment A3:1996 to EN 50065-1:1991.
EN 50083-1:1993—Cabled
distribution systems for television, sound, and interactive multimedia
signals—Part 1: Safety requirements; Amendment A2:1997 to EN 50083-1:1993.
EN 50086-2-3:1995—Conduit
systems for electrical installations—Part 2-3: Particular requirements
for flexible conduit systems; Amendment A11:1998 to EN 50086-2-3:1995.
EN 50086-2-4:1994—Conduit
systems for electrical installations—Part 2-4: Particular requirements
for conduit systems buried underground.
EN 50087:1993—Safety
of household and similar electrical appliances—Particular requirements
for bulk-milk coolers.
EN 50088—Safety of
electric toys; Amendment A1 to EN 50088; Amendment A2 to EN 50088.
EN 50091-1:1993—Uninterruptible
power systems (UPSs)—Part 1: General and safety requirements.
EN 50091-1-1:1996—Uninterruptible
power systems (UPSs)—Part 1-1: General and safety requirements
for UPSs used in operator access areas.
EN 50091-1-2:1998—Uninterruptible
power systems (UPSs)—Part 1-2: General and safety requirements
for UPSs used in restricted access locations.
EN 50106—Safety of
household and similar electrical appliances—Particular rules for
routine tests referring to appliances under the scope of EN 60335-1
and EN 60967; Amendment A1 to EN 50106.
EN 50116:1996—Information
technology equipment—Routine electrical safety testing in production.
EN 50122-1—Railway
applications—Fixed installations—Part 1: Protective provisions
relating to electrical safety and earthing.
EN 50144-1—Safety
of handheld electric motor–operated tools—Part 1: General
requirements.
EN 50144-2-1—Safety
of handheld electric motor–operated tools—Part 2-1: Particular
requirements for drills.
EN 50144-2-2—Safety of handheld
electric motor–operated tools—Part 2-2: Particular requirements
for screwdrivers and impact wrenches.
EN 50144-2-4—Safety
of handheld electric motor–operated tools—Part 2-4: Particular
requirements for sanders.
EN 50144-2-5—Safety
of handheld electric motor–operated tools—Part 2-5: Particular
requirements for circular saws and circular knives.
EN 50144-2-6—Safety
of handheld electric motor–operated tools—Part 2-6: Particular
requirements for hammers.
EN 50144-2-7—Safety
of handheld electric motor–operated tools—Part 2-7: Particular
requirements for spray guns.
EN 50144-2-8—Safety
of handheld electric motor–operated tools—Part 2-8: Particular
requirements for sheet metal shears and nibblers.
EN 50144-2-9—Safety
of handheld electric motor–operated tools—Part 2-9: Particular
requirements for tappers.
EN 50144-2-10—Safety of handheld
electric motor–operated tools—Part 2-10: Particular requirements
for jig saws.
EN 50144-2-11—Safety
of handheld electric motor–operated tools—Part 2-11: Particular
requirements for sabre saws and double-blade reciprocating saws.
EN 50144-2-14—Safety
of handheld electric motor–operated tools—Part 2-14: Particular
requirements for planers.
EN 50144-2-15—Safety
of handheld electric motor–operated tools—Part 2-15: Particular
requirements for hedge trimmers.
EN 50165:1997—Electrical
equipment of nonelectric appliances for household and similar purposes—Safety
requirements.
EN 60061-1—Lamp caps
and holders together with gauges for the control of interchangeability
and safety—Part 1: Lamp caps; Amendment A2 to EN 60061-1; Amendment
A3 to EN 60061-1; Amendment A4 to EN 60061-1.
EN 60061-2—Lamp caps
and holders together with gauges for the control of interchangeability
and safety—Part 2: Lampholders; Amendment A2 to EN 60061-2; Amendment
A3 to EN 60061-2; Amendment A4 to EN 60061-2.
EN 60061-3—Lamp caps
and holders together with gauges for the control of interchangeability
and safety—Part 3: Gauges; Amendment A2 to EN 60061-3; Amendment
A3 to EN 60061-3; Amendment A4 to EN 60061-3.
EN 60065:1993—Safety
requirements for mains-operated electronic and related apparatus for
household and similar general use; Amendment A11:1997 to EN 60065:1993.
EN 60065:1998—Audio,
video, and similar electronic apparatus—Safety requirements.
EN 60073—Basic and
safety principles for man-machine interface, marking and identification—Coding
principles for indication devices and actuators.
EN 60143-1:1993—Series
capacitors for power systems—Part 1: General—Performance,
testing, and rating—Safety requirements—Guide for installation.
EN 60204-1:1997—Safety
of machinery—Electrical equipment of machines—Part 1: General
requirements.
EN 60215:1989—Safety
requirements for radio transmitting equipment; Amendment A1:1992 to
EN 60215:1989; Amendment A2:1994 to EN 60215:1989.
EN 60335-1:1988—Safety
of household and similar electrical appliances—Part 1: General
requirements; Amendment A2:1988 to EN 60335-1:1988; Amendment A5:1989
to EN 60335-1:1988; Amendment A6:1989 to EN 60335-1:1988; Amendment
A51:1991 to EN 60335-1:1988; Amendment A52:1992 to EN 60335-1:1988;
Amendment A53:1992 to EN 60335-1:1988; Amendment A54:1992 to EN 60335-1:1988;
Amendment A55:1993 to EN 60335-1:1988; Amendment A56:1995 to EN 60335-1:1988.
EN 60335-1:1994—Safety
of household and similar electrical appliances—Part 1: General
requirements; Amendment A1:1996 to EN 60335-1:1994; Amendment A11:1995
to EN 60335-1:1994; Amendment A12:1996 to EN 60335-1:1994; Amendment
A13:1998 to EN 60335-1:1994; Amendment A14:1998 to EN 60335-1:1994.
EN 60335-2-2:1995—Safety
of household and similar electrical appliances—Part 2-2: Particular
requirements for vacuum cleaners and water suction cleaning appliances;
Amendment A1:1998 to EN 60335-2-2:1995.
EN 60335-2-3:1995—Safety
of household and similar electrical appliances—Part 2-3: Particular
requirements for electric irons; Amendment A1:1999 to EN 60335-2-3:1995.
EN 60335-2-4:1995—Safety
of household and similar electrical appliances—Part 2-4: Particular
requirements for spin extractors; Amendment A1:1997 to EN 60335-2-4:1995.
EN 60335-2-5:1995—Safety
of household and similar electrical appliances—Part 2-5: Particular
requirements for dishwashers; Amendment A1:1999 to EN 60335-2-5:1995;
Amendment A11:1997 to EN 60335-2-5:1995.
EN 60335-2-6:1999—Safety
of household and similar electrical appliances—Part 2-6: Particular
requirements for stationary cooking ranges, hobs, ovens, and similar
appliances.
EN 60974-1:1990—Safety
requirements for arc welding equipment—Part 1: Welding power sources.
EN 60999-1:1993—Connecting
devices—Safety requirements for screw-type and screwless-type clamping
units for electrical copper conductors—Part 1: General requirements
and particular requirements for conductors from 0.5 mm2 up
to 35 mm2.
EN 61195—Double-capped
fluorescent lamps—Safety specifications; Amendment A1 to EN 61195.
EN 61199—Single-capped
fluorescent lamps—Safety specifications; Amendment A1 to EN 61199;
Amendment A2 to EN 61199.
EN 61204:1995—Low-voltage
power-supply devices, dc output—Performance characteristics and
safety requirements.
EN 61210:1995—Connecting
devices—Flat quick-connect terminations for electrical copper conductors—Safety
requirements.
EN 61603-1:1997—Transmission
of audio and/or video and related signals using infrared radiation—Part
1: General.
EN 132421:1997—Blank
detail specification—Fixed capacitors for electromagnetic interference
suppression—Capacitors for which safety tests are required (safety
tests only).
EN 133200:1999—Sectional specification—Passive
filter units for electromagnetic interference suppression—Filters
for which safety tests are required.
EN 133201:1998—Blank detail
specification—Passive filter units for electromagnetic interference
suppression—Filters for which safety tests are required.
EN 133221:1998—Blank detail
specification—Passive filter units for electromagnetic interference
suppression—Filters for which safety tests are required (safety
tests only).
EN 138000:1996—Generic specification—Fixed
inductors for electromagnetic interference suppression—Inductors
for which safety tests are required.
EN 138100:1996—Sectional Specification—Fixed
inductors for electromagnetic interference suppression—Inductors
for which safety tests are required.
EN 138101:1996—Blank
detail specification—Fixed inductors for electromagnetic interference
suppression—Inductors for which safety tests are required—Assessment
level D.
HD 194 S1:1977—Requirements
concerning the electrical safety of laser apparatus and installations.
HD 251 S3:1982—Safety
of household and similar electrical appliances—Part 1: General
requirements; Amendment A1:1985 to HD 251 S3:1982; Amendment A2:1987
to HD 251 S3:1982; Amendment A3:1987 to HD 251 S3:1982.
IEC Guide 104:1997—The
preparation of safety publications and the use of basic safety publications
and group safety publications.
IEC 60086-4:2000—Primary
batteries—Part 4: Safety of lithium batteries.
IEC 60086-5:2000—Primary
batteries—Part 5: Safety of batteries with aqueous electrolyte.
IEC 60204-1:2000—Safety of
machinery—Electrical equipment of machines—Part 1: General
requirements.
IEC 60204-11:2000—Safety
of machinery—Electrical equipment of machines—Part 11: Requirements
for HV equipment for voltages above 1000 V ac or 1500 V dc and not exceeding
36 kV.
IEC 60252-1:2001—Ac
motor capacitors—Part 1: General—Performance, testing, and
rating—Safety requirements—Guide for installation and operation.
IEC 60445:1999—Basic and safety
principles for man-machine interface, marking, and identification—Identification
of equipment terminals and of terminations of certain designated conductors,
including general rules for an alphanumeric system.
IEC 60446:1999—Basic
and safety principles for man-machine interface, marking, and identification—Identification
of conductors by colours or numerals.
IEC 60513 TR3:1994—Fundamental
aspects of safety standards for medical electrical equipment.
IEC 60519-1:1984—Safety
in electroheat installations—Part 1: General requirements.
IEC 60519-3:1988—Safety
in electroheat installations—Part 3: Particular requirements for
induction and conduction heating and induction melting installations.
IEC 60519-6:1982—Safety
in electroheat installations—Part 6: Specifications for safety
in industrial microwave heating equipment.
IEC 60519-7:1983—Safety
in electroheat installations—Part 7: Particular requirements for
installations with electron guns.
IEC 60519-9:1987—Safety
in electroheat installations—Part 9: Particular requirements for
high-frequency dielectric heating installations.
IEC 60601-1:1988—Medical
electrical equipment—Part 1: General requirements for safety.
IEC 60601-1-2:1993—Medical
electrical equipment—Part 1: General requirements for safety—2.
Collateral standard: Electromagnetic compatibility—Requirements
and tests.
IEC 60601-1-3:1994—Medical
electrical equipment—Part 1: General requirements for safety—3.
Collateral standard: General requirements for radiation protection in
diagnostic x-ray equipment.
IEC 60601-1-4:2000—Medical
electrical equipment—Part 1-4: General requirements for safety—Collateral
standard: Programmable electrical medical systems.
IEC 60601-2-1:1998—Medical
electrical equipment—Part 2-1: Particular requirements for the
safety of electron accelerators in the range of 1 to 50 MeV.
IEC 60601-2-2:1998—Medical
electrical equipment—Part 2-2: Particular requirements for the
safety of high-frequency surgical equipment.
IEC 60601-2-3:1991—Medical
electrical equipment—Part 2: Particular requirements for the safety
of short-wave therapy equipment.
IEC 60601-2-4:1983—Medical
electrical equipment—Part 2: Particular requirements for the safety
of cardiac defibrillators and cardiac defibrillator monitors.
IEC 60601-2-5:2000—Medical
electrical equipment—Part 2-5: Particular requirements for the
safety of ultrasonic physiotherapy equipment.
IEC 60601-2-6:1984—Medical
electrical equipment—Part 2: Particular requirements for the safety
of microwave therapy equipment.
IEC 60601-2-7:1998—Medical
electrical equipment—Part 2-7: Particular requirements for the
safety of high-voltage generators of diagnostic x-ray generators.
IEC 60601-2-8:1999—Medical
electrical equipment—Part 2-8: Particular requirements for the
safety of therapeutic x-ray equipment operating in the range of 10 kV
to 1 MV.
IEC 60601-2-9:1996—Medical
electrical equipment—Part 2: Particular requirements for the safety
of patient contact dosemeters used in radiotherapy with electrically
connected radiation detectors.
IEC 60601-2-11:1997—Medical
electrical equipment—Part 2: Particular requirements for the safety
of gamma-beam therapy equipment.
IEC 60601-2-15:1988—Medical
electrical equipment—Part 2: Particular requirements for the safety
of capacitor discharge x-ray generators.
IEC 60601-2-17:1989—Medical
electrical equipment—Part 2: Particular requirements for the safety
of remote-controlled automatically driven gamma-ray afterloading equipment.
IEC 60601-2-18:1996—Medical
electrical equipment—Part 2: Particular requirements for the safety
of endoscopic equipment.
IEC 60601-2-22:1995—Medical
electrical equipment—Part 2: Particular requirements for the safety
of diagnostic and therapeutic laser equipment.
IEC 60601-2-24:1998—Medical
electrical equipment—Part 2-24: Particular requirements for the
safety of infusion pumps and controllers.
IEC 60601-2-25:1993—Medical
electrical equipment—Part 2: Particular requirements for the safety
of electrocardiographs.
IEC 60601-2-26:1994—Medical
electrical equipment—Part 2: Particular requirements for the safety
of electroencephalographs.
IEC 60601-2-27:1994—Medical
electrical equipment—Part 2: Particular requirements for the safety
of electrocardiographic monitoring equipment.
IEC 60601-2-28:1993—Medical
electrical equipment—Part 2: Particular requirements for the safety
of x-ray source assemblies and x-ray tube assemblies for medical diagnosis.
IEC 60601-2-29:1999—Medical
electrical equipment—Part 2-29: Particular requirements for the
safety of radiotherapy simulators.
IEC 60601-2-30:1999—Medical
electrical equipment—Part 2-30: Particular requirements for the
safety, including essential performance, of automatic cycling noninvasive
blood pressure monitoring equipment.
IEC 60601-2-31:1994—Medical
electrical equipment—Part 2: Particular requirements for the safety
of external cardiac pacemakers with internal power source.
IEC 60601-2-32:1994—Medical
electrical equipment—Part 2: Particular requirements for the safety
of associated equipment of x-ray equipment.
IEC 60601-2-33:1995—Medical
electrical equipment—Part 2: Particular requirements for the safety
of magnetic resonance equipment for medical diagnosis.
IEC 60601-2-34:2000—Medical
electrical equipment—Part 2-34: Particular requirements for the
safety and essential performance of invasive blood pressure monitoring
equipment.
IEC 60601-2-38:1996—Medical
electrical equipment—Part 2: Particular requirements for the safety
of electrically operated hospital beds.
IEC 60601-2-40—Medical
electrical equipment—Part 2-40: Particular requirements for the
safety of electromyographs and evoked response equipment.
IEC 60601-2-44:1999—Medical
electrical equipment—Part 2-44: Particular requirements for the
safety of x-ray equipment for computed tomography.
IEC 60601-2-45:1998—Medical
electrical equipment—Part 2-45: Particular requirements for the
safety of mammographic x-ray equipment and mammographic stereotactic
devices.
IEC 60601-2-46:1998—Medical
electrical equipment—Part 2-46: Particular requirements for the
safety of operating tables.
IEC 60728-11:1997—Cabled
distribution systems for television and sound signals—Part 11:
Safety.
IEC 60742:1983—Isolating
transformers and safety isolating transformers—Requirements.
IEC 60745-1:1997—Safety of
handheld motor-operated electric tools—Part 1: General requirements.
IEC 60825-1:1998—Safety
of laser products—Part 1: Equipment classification, requirements,
and user's guide.
IEC 60825-2:2000—Safety
of laser products—Part 2: Safety of optical fibre communication
systems.
IEC 60825-4—Safety
of laser products—Part 4: Laser guards.
IEC 60825-7 TR2:2000—Safety
of laser products—Part 7: Safety of products emitting infrared
optical radiation, exclusively used for wireless "free air" data transmission
and surveillance.
IEC 60825-8 TR3:1999—Safety
of laser products—Part 8: Guidelines for the safe use of medical
laser equipment.
IEC 60825-9 TR3:1999—Safety
of laser products—Part 9: Compilation of maximum permissible exposure
to incoherent optical radiation.
IEC 60831-1:1996—Shunt power
capacitors of the self-healing type for ac systems having a rated voltage
up to and including 1000 V—Part 1: General—Performance, testing,
and rating—Safety requirements—Guide for installation and
operation.
IEC 60871-1:1997—Shunt
capacitors for ac power systems having a rated voltage above 1000 V—Part
1: General performance, testing, and rating—Safety requirements—Guide
for installation and operation.
IEC 60922—Auxiliaries
for lamps—Ballasts for discharge lamps (excluding tubular fluorescent
lamps)—General and safety requirements.
IEC 60924:1990—Dc-supplied
electronic ballasts for tubular fluorescent lamps—General and safety
requirements.
IEC 60926—Auxiliaries
for lamps—Starting devices (other than glow starters) —General
and safety requirements.
IEC 60928:1999—Auxiliaries
for lamps—Ac-supplied electronic ballasts for tubular fluorescent
lamps—General and safety requirements.
IEC 60931-1:1996—Shunt
power capacitors of the non-self-healing type for ac systems having
a rated voltage up to and including 1000 V—Part 1: General—Performance,
testing, and rating—Safety requirements—Guide for installation
and operation.
IEC 60938-2-1:1999—Fixed
inductors for electromagnetic interference suppression—Part 2-1:
Blank detail specification—Inductors for which safety tests are
required—Assessment level D.
IEC 60938-2-2:1999—Fixed
inductors for electromagnetic interference suppression—Part 2-2:
Blank detail specification—Inductors for which safety tests are
required (only).
IEC 61010-1:2001—Safety
requirements for electrical equipment for measurement, control, and
laboratory use—Part 1: General requirements.
IEC 61010-2-010:1992—Safety
requirements for electrical equipment for measurement, control, and
laboratory use—Part 2-010: Particular requirements for laboratory
equipment for the heating of material.
IEC 61010-2-020:1992—Safety
requirements for electrical equipment for measurement, control, and
laboratory use—Part 2-020: Particular requirements for laboratory
centrifuges.
IEC 61010-2-031:1993—Safety
requirements for electrical equipment for measurement, control, and
laboratory use—Part 2-031: Particular requirements for handheld
probe assemblies for electrical measurement and test.
IEC 61010-2-032:1994—Safety
requirements for electrical equipment for measurement, control, and
laboratory use—Part 2-032: Particular requirements for handheld
current clamps for electrical measurement and test.
IEC 61010-2-061:1995—Safety
requirements for electrical equipment for measurement, control, and
laboratory use—Part 2-061: Particular requirements for laboratory
atomic spectrometers with thermal atomization and ionization.
IEC 61029-1:1990—Safety of
transportable motor-operated electric tools—Part 1: General requirements.
IEC 61046:1993—Dc-or
ac-supplied electronic step-down convertors for filament lamps—General
and safety requirements.
IEC 61048:1999—Auxiliaries
for lamps—Capacitors for use in tubular fluorescent and other discharge
lamp circuits—General and safety requirements.
IEC 61050:1991—Transformers
for tubular discharge lamps having a no-load output voltage exceeding
1000 V (generally called neon transformers)—General and safety
requirements.
IEC 61069-7:1999—Industrial-process
measurement and control—Evaluation.
IEC 61285:1994—Industrial-process
control—Safety of analyzer houses.
IEC 61293:1994—Marking
of electrical equipment with ratings related to electrical supply—Safety
requirements.
IEC 61310-3:1999—Safety of
machinery—Indication, marking, and actuation—Part 3: Requirements
for the location and operation of actuators.
IEC 61496-1:1997—Safety
of machinery—Electro-sensitive protective equipment—Part 1:
General requirements and tests.
IEC 61496-2:1997—Safety
of machinery—Electro-sensitive protective equipment—Part 2:
Particular requirements for equipment using active opto-electronic protective
devices (AOPDs).
IEC 61496-3:2001—Safety
of machinery—Electro-sensitive protective equipment—Part 3:
Particular requirements for active optoelectronic protective devices
responsive to diffuse reflection (AOPDDR).
IEC 61508-1:1998—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 1: General requirements.
IEC 61508-2:2000—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 2: Requirements for electrical, electronic, and programmable
electronic safety-related systems.
IEC 61508-3:1998—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 3: Software requirements.
IEC 61508-4:1998—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 4: Definitions and abbreviations.
IEC 61508-5:1998—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 5: Examples of methods for the determination of safety
integrity levels.
IEC 61508-7:2000—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 7: Overview of techniques and measures.
IEC 61557-1:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 1: General requirements.
IEC 61557-2:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 2: Insulation resistance.
IEC 61557-3:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 3: Loop impedance.
IEC 61508-4:1998—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 4: Definitions and abbreviations.
IEC 61508-5:1998—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 5: Examples of methods for the determination of
safety integrity levels.
IEC 61508-7:2000—Functional
safety of electrical, electronic, and programmable electronic safety-related
systems—Part 7: Overview of techniques and measures.
IEC 61557-1:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 1: General requirements.
IEC 61557-2:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 2: Insulation resistance.
IEC 61557-3:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 3: Loop impedance.
IEC 61557-4:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 4: Resistance of earth connection and equipotential
bonding.
IEC 61557-5:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 5: Resistance to earth.
IEC 61557-6:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 6: Residual current devices (RCD) in TT and TN
systems.
IEC 61557-7:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 7: Phase sequence.
IEC 61557-8:1997—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 8: Insulation monitoring devices for IT systems.
IEC 61557-9:1999—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 9: Equipment for insulation fault location in IT
systems.
IEC 61557-10:2000—Electrical
safety in low-voltage distribution systems up to 1000 V ac and 1500
V dc—Equipment for testing, measuring, or monitoring of protective
measures—Part 10: Combined measuring equipment for testing, measuring,
or monitoring.
IEC 61558-1:1998—Safety
of power transformers, power-supply units, and similar—Part 1:
General requirements and tests.
IEC 61558-2-1:1997—Safety
of power transformers, power-supply units, and similar—Part 2:
Particular requirements for separating transformers for general use.
IEC 61558-2-2:1997—Safety
of power transformers, power supply units, and similar—Part 2-2:
Particular requirements for control transformers.
IEC 61558-2-4:1997—Safety
of power transformers, power-supply units, and similar—Part 2:
Particular requirements for isolating transformers for general use.
IEC 61558-2-6:1997—Safety
of power transformers, power-supply units, and similar—Part 2:
Particular requirements for safety isolating transformers for general
use.
IEC 61558-2-7:1997—Safety
of power transformers, power-supply units, and similar—Part 2:
Particular requirements for transformers for toys.
IEC 61558-2-8:1998—Safety
of small power transformers, power-supply units, and similar—Part
2-8: Particular requirements for bell and chime transformers.
IEC 61558-2-13:1999—Safety
of power transformers, power-supply units, and similar devices—Part
2-13: Particular requirements for auto-transformers for general use.
IEC 61558-2-15:1999—Safety
of power transformers, power-supply units, and similar—Part 2-15:
Particular requirements for isolating transformers for the supply
of medical locations.
IEC 61558-2-17:1997—Safety
of power transformers, power supply units, and similar—Part 2:
Particular requirements for transformers for switch-mode power supplies.
IEC 61558-2-19:2000—Safety
of power transformers, power supply units, and similar devices—Part
2-19: Particular requirements for perturbation attenuation transformers.
IEC 61558-2-20:2000—Safety
of power transformers, power supply units, and similar devices—Part
2-20: Particular requirements for small reactors.
IEC 61965:2000—Mechanical
safety of cathode-ray tubes.
IEC 62083:2000—Medical
electrical equipment—Requirements for the safety of radiotherapy
treatment planning systems.
IEC 62151:2000—Safety
of equipment electrically connected to a telecommunication network.
IEEE C95.1:1999—IEEE
standard for safety levels with respect to human exposure to radio-frequency
electromagnetic fields, 3 kHz to 300 GHz.
IEEE C95.3:1991 (R1997)—IEEE-recommended
practice for the measurement of potentially hazardous electromagnetic
fields—RF and microwave.
IEEE 80:2000—Safety
in ac substation grounding.
IEEE 81.2:1991—IEEE
guide for measurement of impedance and safety characteristics of large,
extended, or interconnected grounding systems.
IEEE 510:1983—IEEE-recommended
practices for safety in high-voltage and high-power testing.
IEEE 902:1998—IEEE
guide for maintenance, operation, and safety of industrial and commercial
power systems.
ISA 12.02.01:1999—Electrical
apparatus for use in Class I, Zone 0, 1, and 2 hazardous (classified)
locations—Intrinsic safety.
ISA RP12.2.02:1996—Recommendations
for the preparation, content, and organization of intrinsic safety
control drawings.
ISO 3864:1984—Safety
colours and safety signs.
ISO 4126-1:1991—Safety
valves—Part 1: General requirements.
ISO 6178:1983—Centrifuges—Construction
and safety rules—Method for the calculation of the tangential
stress in the shell of a cylindrical centrifuge rotor.
ISO 6309:1987—Fire
protection—Safety signs.
ISO 10079-1:1999—Medical
suction equipment—Part 1: Electrically powered suction equipment—Safety
requirements.
ISO 11197:1996—Medical
electrical equipment—Particular requirements for safety of medical
supply units.
ISO 11553:1996—Safety
of machinery—Laser processing machines—Safety requirements.
ISO 13090-1:1998—Mechanical
vibration and shock—Guidance on safety aspects of tests and experiments
with people—Part 1: Exposure to whole-body mechanical vibration
and repeated shock.
ISO 13943:2000—Fire
safety—Vocabulary.
ISO 14121:1999—Safety
of machinery—Principles of risk assessment.
ISO 14708-1:2000—Implants
for surgery—Active implantable medical devices—Part 1: General
requirements for safety, marking, and for information to be provided
by the manufacturer.
ISO/IEC Guide 51:1999—Safety
aspects—Guidelines for their inclusion in standards.
ISO/IEC Guide 63:1999—Guide
to the development and inclusion of safety aspects in international
standards for medical devices.
ISO/TR 12100-1:1992—Safety
of machinery—Basic concepts, general principles for design—Part
1: Basic terminology, methodology.
ISO/TR 12100-2:1992—Safety
of machinery—Basic concepts, general principles for design—Part
2: Technical principles and specifications.
ISO/TR 13387-1:1999—Fire
safety engineering—Part 1: Application of fire performance concepts
to design objectives.
ISO/TR 13387-3:1999—Fire
safety engineering—Part 3: Assessment and verification of mathematical
fire models.
ISO/TR 16142:1999—Medical
devices—Guidance on the selection of standards in support of
recognized essential principles of safety and performance of medical
devices.
PD R044-001:1999—Safety
of machinery—Guidance and recommendations for the avoidance of
hazards due to static electricity.
|
