|
EMC Standards
The following list details some of the major electromagnetic compatibility
(EMC) standards in place worldwide.
Harmonized standards for the implementation of the Council Directive
89/336/EEC (2000/C 359/02).
EN 50065-1:1991—Signaling on low-voltage
electrical installations in the frequency range 3 to 148.5 kHz—Part
1: General requirements, frequency bands and electromagnetic disturbances;
Amendment A1:1992 to EN 50065-1:1991; Amendment A2:1995 to EN 50065-1:1991;
Amendment A3:1996 to EN 50065-1:1991.
EN 50081-1:1992—Electromagnetic compatibility—Generic
emission standard—Part 1: Residential, commercial, and light industry.
EN 50081-2:1993—Electromagnetic compatibility—Generic
emission standard—Part 2: Industrial environment.
EN 50082-1:1992—Electromagnetic compatibility—Generic
immunity standard—Part 1: Residential, commercial, and light industry.
EN 50082-1:1997—Electromagnetic compatibility—Generic
immunity standard—Part 1: Residential, commercial, and light industry.
EN 50082-2:1995—Electromagnetic compatibility—Generic
immunity standard—Part 2: Industrial environment.
EN 50083-2:1995—Cabled networks for television
signals, sound signals, and interactive services—Part 2: Electromagnetic
compatibility for equipment; Amendment A1:1997 to EN 50083-2:1995.
EN 50090-2-2:1996—Home and building electronic
systems (HBES)—Part 2-2: System overview—General technical
requirements.
EN 50091-2:1995—Uninterruptible power systems
(UPS)—Part 2: EMC requirements.
EN 50130-4:1995—Alarm systems—Part
4: Electromagnetic compatibility—Product family standard: Immunity
requirements for components of fire, intruder, and social alarm systems;
Amendment A1:1998 to EN 50130-4:1995.
EN 50148:1995—Electronic taximeters.
EN 50199:1995—Electromagnetic compatibility
(EMC)—Product standard for arc welding equipment.
EN 50227:1997—Control circuit devices and
switching elements, proximity sensors, dc interface for proximity sensors
and switching amplifiers (NAMUR).
EN 50263:1999—Electromagnetic compatibility
(EMC)—Product standard for measuring relays and protection equipment.
EN 50270:1999—Electromagnetic compatibility—Electrical
apparatus for the detection and measurement of combustible gases, toxic
gases, or oxygen.
EN 55011:1991—Limits and methods
of measurement of radio disturbance characteristics of industrial, scientific,
and medical (ISM) radio-frequency equipment; Amendment A2:1996 to EN
55011:1991; Amendment A1:1997 to EN 55011:1991.
EN 55011:1998—Industrial, scientific, and
medical (ISM) radio-frequency equipment—Radio disturbance characteristics—Limits
and methods of measurement; Amendment A1:1999 to EN 55011:1998.
EN 55013:1990—Limits and methods of measurement
of radio disturbance characteristics of broadcast receivers and associated
equipment; Amendment A12:1994 to EN 55013:1990; Amendment A13:1996 to
EN 55013:1990; Amendment A14:1999 to EN 55013:1990.
EN 55014-1:1993—Electromagnetic compatibility—Requirements
for household appliances, electric tools, and similar apparatus—Part
1: Emission—Product family standard; Amendment A1:1997 to EN 55014-1:1993;
Amendment A2:1999 to EN 55014-1:1993.
EN 55014-2:1997—Electromagnetic compatibility—Requirements
for household appliances, electric tools, and similar apparatus—Part
2: Immunity—Product family standard.
EN 55015:1996—Limits and methods of measurement
of radio disturbance characteristics of electrical lighting and similar
equipment; Amendment A1:1997 to EN 55015:1996; Amendment A2:1999 to
EN 55015:1996.
EN 55020:1994—Electromagnetic immunity of
broadcast receivers and associated equipment; Amendment A11:1996 to
EN 55020:1994; Amendment A12:1999 to EN 55020:1994; Amendment A13:1999
to EN 55020:1994; Amendment A14:1999 to EN 55020:1994.
EN 55022:1994—Limits and methods of measurement
of radio disturbance characteristics of information technology equipment;
Amendment A1:1995 to EN 55022:1994; Amendment A2:1997 to EN 55022:1994.
EN 55022:1998—Information technology equipment—Radio
disturbance characteristics—Limits and methods of measurement.
EN 55024:1998—Information technology equipment—Immunity
characteristics—Limits and methods of measurement.
EN 55103-1:1996—Electromagnetic compatibility—Product
family standard for audio, video, audiovisual, and entertainment lighting
control apparatus for professional use—Part 1: Emission.
EN 55103-2:1996—Electromagnetic compatibility—Product
family standard for audio, video, audiovisual, and entertainment lighting
control apparatus for professional use—Part 2: Immunity.
EN 55104:1995—Electromagnetic compatibility—Immunity
requirements for household appliances, tools, and similar apparatus—Product
family standard.
EN 60204-31:1998—Safety of machinery—Electrical
equipment of machines—Part 31: Particular safety and EMC requirements
for sewing machines, units, and systems.
EN 60439-1:1994—Low-voltage switch gear
and control gear assemblies—Part 1: Type-tested and partially type-tested
assemblies; Amendment A11:1996 to EN 60439-1:1994.
EN 60439-1:1999—Low-voltage switch gear
and control gear assemblies—Part 1: Type-tested and partially type-tested
assemblies.
EN 60521:1995—Class 0.5, 1, and 2
alternating-current watt-hour meters.
EN 60555-2:1987—Disturbances in supply systems
caused by household appliances and similar electrical equipment—Part
2: Harmonics.
EN 60555-3:1987—Disturbances in supply systems
caused by household appliances and similar electrical equipment—Part
3: Voltage fluctuations; Amendment A1:1991 to EN 60555-3:1987.
EN 60669-2-1:1996—Switches for household
and similar fixed electrical installations—Part 2: Particular requirements—Section
1: Electronic switches; Amendment A11:1997 to EN 60669-2-1:1996.
EN 60669-2-2:1997—Switches for household
and similar fixed electrical installations—Part 2: Particular requirements—Section
2: Electromagnetic remote-control switches (RCS).
EN 60669-2-3:1997—Switches for household
and similar fixed electrical installations—Part 2-3: Particular
requirements—Time-delay switches (TDS).
EN 60687:1992—Alternating current
static watt-hour meters for active energy (classes 0.2 S and 0.5 S).
EN 60730-1:1995—Automatic electrical controls
for household and similar use—Part 1: General requirements; Amendment
A11:1996 to EN 60730-1:1995; Amendment A17:2000 to EN 60730-1:1995.
EN 60730-2-5:1995—Automatic electrical controls
for household and similar use—Part 2: Particular requirements for
automatic electrical burner control systems.
EN 60730-2-6:1995—Automatic electrical controls
for household and similar use—Part 2: Particular requirements for
automatic electrical pressure sensing controls including mechanical
requirements; Amendment A1:1997 to EN 60730-2-6:1995.
EN 60730-2-7:1991—Automatic electrical controls
for household and similar use—Part 2: Particular requirements for
timers and time switches; Amendment A1:1997 to EN 60730-2-7:1991.
EN 60730-2-8:1995—Automatic electrical controls
for household and similar use—Part 2: Particular requirements for
electrically operated water valves, including mechanical requirements;
Amendment A2:1997 to EN 60730-2-8:1995; Amendment A1:1997 to EN 60730-2-8:1995.
EN 60730-2-9:1995—Automatic electrical controls
for household and similar use—Part 2: Particular requirements for
temperature sensing controls; Amendment A1:1996 to EN 60730-2-9:1995;
Amendment A2:1997 to EN 60730-2-9:1995.
EN 60730-2-11:1993—Automatic electrical
controls for household and similar use—Part 2: Particular requirements
for energy regulators; Amendment A1:1997 to EN 60730-2-11:1993.
EN 60730-2-13:1998—Automatic electrical
controls for household and similar use—Part 2: Particular requirements
for humidity sensing controls.
EN 60730-2-14:1997—Automatic electrical
controls for household and similar use—Part 2: Particular requirements
for electric actuators.
EN 60730-2-18:1999—Automatic electrical
controls for household and similar use—Part 2: Particular requirements
for automatic electrical water and air flow sensing controls, including
mechanical requirements.
EN 60870-2-1:1996—Telecontrol equipment
and systems—Part 2: Operating conditions—Section 1: Power
supply and electromagnetic compatibility.
EN 60945:1997—Maritime navigation and radiocommunication
equipment and systems—General requirements—Methods of testing
and required test results.
EN 60947-1:1997—Low-voltage switch gear
and control gear—Part 1: General rules.
EN 60947-1:1999—Low-voltage switch gear
and control gear—Part 1: General rules.
EN 60947-2:1996—Low-voltage switch gear
and control gear—Part 2: Circuit breakers; Amendment A1:1997 to
EN 60947-2:1996.
EN 60947-3:1992—Low-voltage switch gear
and control gear—Part 3: Switches, disconnectors, switch-disconnectors,
and fuse-combination units; Amendment A1:1995 to EN 60947-3:1992.
EN 60947-3:1999—Low-voltage switch gear
and control gear—Part 3: Switches, disconnectors, switch-disconnectors,
and fuse-combination units.
EN 60947-4-1:1992—Low-voltage switch gear
and control gear—Part 4-1: Contactors and motor starters—Electromechanical
contactors and motor starters; Amendment A2:1997 to EN 60947-4-1:1992.
EN 60947-4-2:1996—Low-voltage switch gear
and control gear—Part 4: Contactors and motor starters—Section
2: Ac semiconductor motor controllers and starters; Amendment A2:1998
to EN 60947-4-2:1996.
EN 60947-4-2:2000—Low-voltage switch gear
and control gear—Part 4-2: Contactors and motor starters—Ac
semiconductor motor controllers and starters.
EN 60947-4-3:2000—Low-voltage switch gear
and control gear—Part 4-3: Contactors and motor starters—Ac
semiconductor controllers and contactors for nonmotor loads.
EN 60947-5-1:1991—Low-voltage switch
gear and control gear—Part 5: Control circuit devices and switching
elements—Section 1: Electromechanical control circuit devices;
Amendment A12:1997 to EN 60947-5-1:1991.
EN 60947-5-1:1997—Low-voltage switch gear
and control gear—Part 5-1: Control circuit devices and switching
elements—Electromechanical control circuit devices; Amendment A12:1999
to EN 60947-5-1:1997.
EN 60947-5-2:1997—Low-voltage switch
gear and control gear—Part 5: Control circuit devices and switching
elements—Section 2: Proximity switches.
EN 60947-5-2:1998—Low-voltage switch gear
and control gear—Part 5-2: Control circuit devices and switching
elements—Proximity switches.
EN 60947-5-3:1999—Low-voltage switch gear
and control gear—Part 5-3: Control circuit devices and switching
elements—Requirements for proximity devices with defined behavior
under fault conditions (PDF).
EN 60947-5-6:2000—Low-voltage switch gear
and control gear—Part 5-6: Control circuit devices and switching
elements—Dc interface for proximity sensors and switching amplifiers
(NAMUR).
EN 60947-6-1:1991—Low-voltage switch gear
and control gear—Part 6-1: Multiple-function equipment—Automatic
transfer switching equipment; Amendment A2:1997 to EN 60947-6-1:1991.
EN 60947-6-2:1993—Low-voltage switch gear
and control gear—Part 6-2: Multiple-function equipment—Control
and protective switching devices (or equipment) (CPS); Amendment A1:1997
to EN 60947-6-2:1993.
EN 61000-3-2:1995—Electromagnetic compatibility
(EMC)—Part 3-2: Limits—Limits for harmonic current emissions
(equipment input current up to and including 16 A per phase); Amendment
A1:1998 to EN 61000-3-2:1995; Amendment A2:1998 to EN 61000-3-2:1995;
Amendment A14:2000 to EN 61000-3-2:1995.
EN 61000-3-3:1995—Electromagnetic compatibility
(EMC)—Part 3-3: Limits—Limitation of voltage fluctuations
and flicker in low-voltage supply systems for equipment with rated current
up to 16 A.
EN 61000-3-11:2000—Electromagnetic
compatibility (EMC)—Part 3-11: Limits—Limitation of voltage
changes, voltage fluctuations, and flicker in public low-voltage supply
systems—Equipment with rated current ¾75 A and subject to
conditional connection.
EN 61000-6-2:1999—Electromagnetic compatibility
(EMC)—Part 6-2: Generic standards—Immunity for industrial
environments.
EN 61008-1:1994—Electrical accessories—Residual
current–operated circuit breakers (RCCBs) without integral overcurrent
protection for household and similar uses—Part 1: General rules;
Amendment A2:1995 to EN 61008-1:1994; Amendment A14:1998 to EN 61008-1:1994.
EN 61009-1:1994—Electrical accessories—Residual
current–operated circuit breakers (RCCBs) with integral overcurrent
protection for household and similar uses—Part 1: General rules;
Amendment A1:1995 to EN 61009-1:1994; Amendment A14:1998 to EN 61009-1:1994.
EN 61036:1996—Alternating current static
watt-hour meters for active energy (classes 1 and 2); Amendment A1:2000
to EN 61036:1996.
EN 61037:1992—Electricity metering—Tariff
and load control—Particular requirements for electronic ripple
control receivers; Amendment A1:1996 to EN 61037:1992; Amendment A2:1998
to EN 61037:1992.
EN 61038:1992—Electricity metering—Tariff
and load control—Particular requirements for time switches; Amendment
A1:1996 to EN 61038:1992; Amendment A2:1998 to EN 61038:1992.
EN 61131-2:1994—Programmable controllers—Part
2: Equipment requirements and tests; Amendment A11:1996 to EN 61131-2:1994;
Amendment A12:2000 to EN 61131-2:1994.
EN 61268:1996—Alternating current static
var-hour meters for reactive energy (classes 2 and 3).
EN 61326:1997—Electrical equipment for measurement,
control, and laboratory use—EMC requirements; Amendment A1:1998
to EN 61326:1997.
EN 61543:1995—Residual current–operated
protective devices (RCDs) for household and similar use—Electromagnetic
compatibility.
EN 61547:1995—Equipment for general lighting
purposes—EMC immunity requirements.
EN 61800-3:1996—Adjustable speed electrical
power drive systems—Part 3: EMC product standard including specific
test methods; Amendment A11:2000 to EN 61800-3:1996.
EN 61812-1:1996—Specified time relays for
industrial use—Part 1: Requirements and tests; Amendment A11:1999
to EN 61812-1:1996.
EN 12015:1998—Electromagnetic compatibility—Product
family standard for lifts, escalators, and passenger conveyors—Emission.
EN 12016:1998—Electromagnetic compatibility—Product
family standard for lifts, escalators, and passenger conveyors—Immunity.
EN ISO 14982:1998—Agricultural and forestry
machines—Electromagnetic compatibility—Test methods and acceptance
criteria (ISO 14982:1998).
ETS 300 086/A2:1997—Radio equipment and
systems (RES); Land mobile group; Technical characteristics and test
conditions for radio equipment with an internal or external RF connector
intended primarily for analog speech.
ETS 300 113/A1:1997—Radio equipment and
systems (RES); Land mobile service; Technical characteristics and test
conditions for radio equipment intended for the transmission of data
(and speech) and having an antenna connector.
ETS 300 135/A1:1997—Radio equipment
and systems (RES); Angle-modulated citizens band radio equipment (CEPT
PR 27 Radio Equipment); Technical characteristics and methods of measurement.
EN 300 162:1996—Electromagnetic compatibility
and radio spectrum matters (ERM); Radiotelephone transmitters and receivers
for the maritime mobile service operating in VHF bands; Technical characteristics/methods
of measurement.
ETS 300 197/A2:1997—Transmission and multiplexing
(TM); Parameters for radio relay systems for the transmission of digital
signals and analog video signals operating at 38 GHz.
ETS 300 198/A1:1997—Transmission and multiplexing
(TM); Parameters for radio relay systems for the transmission of digital
signals and analog video signals operating at 23 GHz.
EN 300 220-1:1997—Electromagnetic compatibility
and radio spectrum matters (ERM); Short-range devices; Technical characteristics
and test methods for radio equipment to be used in the 25 to 1000 MHz
frequency range with power levels ranging up to 500 mW; Part 1: Parameters
intended for regulatory purposes.
ETS 300 224:1998—Electromagnetic compatibility
and radio spectrum matters (ERM); On-site paging service; Technical
and functional characteristics for on-site paging systems, including
test methods.
EN 300 279:1999—Electromagnetic compatibility
and radio spectrum matters (ERM); Electromagnetic compatibility (EMC)
standard for private land mobile radio (PMR) and ancillary equipment
(speech and/or nonspeech).
ETS 300 279/A1:1997—Radio equipment and
systems (RES); Electromagnetic compatibility (EMC) standard for private
land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).
ETS 300 296/A1:1997—Radio equipment and
systems (RES); Land mobile service; Technical characteristics and test
conditions for radio equipment using integral antennas intended primarily
for analog speech.
ETS 300 328/A1:1997—Radio equipment and
systems (RES); Wideband transmission systems; Technical characteristics
and test conditions for data transmission equipment operating in the
2.4 GHz ISM band and using spread-spectrum modulation techniques.
ETS 300 329:1997—Radio equipment and systems
(RES); Electromagnetic compatibility (EMC) for digital enhanced cordless
telecommunications (DECT) equipment.
EN 300 339:1998—Electromagnetic compatibility
and radio spectrum matters (ERM); General electromagnetic compatibility
(EMC) for radio communications equipment.
ETS 300 340/A1:1997—Radio equipment and
systems (RES); Electromagnetic compatibility (EMC) for European radio
message system (ERMES) paging receivers.
ETS 300 341/A1:1997—Radio equipment and
systems (RES); Land mobile service; Technical characteristics and test
conditions for radio equipment using an integral antenna transmitting
signals to initiate a specific response in the receiver.
ETS 300 342-1:1997—Radio equipment
and systems (RES); Electromagnetic compatibility (EMC) for European
digital cellular telecommunications system (GSM 900 MHz and DCS 1800
MHz); Part 1: Mobile and portable radio and ancillary equipment.
ETS 300 384/A1:1997—Radio broadcasting systems;
Very high frequency (VHF), frequency modulated, sound broadcasting transmitters.
EN 300 385:1999—Electromagnetic compatibility
and radio spectrum matters (ERM); Electromagnetic compatibility (EMC)
standard for fixed radio links and ancillary equipment.
EN 300 385/A1:1997—Radio equipment and systems
(RES); Electromagnetic compatibility (EMC) standard for fixed radio
links and ancillary equipment with data rates at around 2 Mbit/sec and
above.
EN 300 386:2000—Electromagnetic compatibility
and radio spectrum matters (ERM); Telecommunication network equipment;
Electromagnetic compatibility (EMC) requirements.
EN 300 386-2:1997—Electromagnetic compatibility
and radio spectrum matters (ERM); Telecommunication network equipment;
Electromagnetic compatibility (EMC) requirements; Part 2: Product family
standard.
ETS 300 390/A1:1997—Radio equipment and
syst
EN 61000-4-6:1996—Electromagnetic compatibility
(EMC)—Part 4-6: Testing and measurement techniques—Immunity
to conducted disturbances, induced by radio-frequency fields.
EN 61000-4-7:1993—Electromagnetic compatibility
(EMC)—Part 4-7: Testing and measurement techniques—General
guide on harmonics and interharmonics measurements and instrumentation,
for power supply systems and equipment connected thereto.
EN 61000-4-8:1993—Electromagnetic compatibility
(EMC)—Part 4-8: Testing and measurement techniques—Power frequency
magnetic field immunity test.
EN 61000-4-9:1993—Electromagnetic compatibility
(EMC)—Part 4-9: Testing and measurement techniques—Pulse magnetic
field immunity test.
EN 61000-4-23:2000—Electromagnetic compatibility
(EMC)—Part 4-23: Testing and measurement techniques—Test methods
for protective devices for HEMP and other radiated disturbances.
EN 61000-4-28:2000—Electromagnetic compatibility
(EMC)—Part 4-28: Testing and measurement techniques—Variation
of power frequency, immunity test.
EN 61248-3:1997—Transformers and inductors
for use in electronic and telecommunication equipment—Part 3: Sectional
specification for power transformers on the basis of the capability
approval procedure.
EN 61248-4:1997—Transformers and inductors
for use in electronic and telecommunication equipment—Part 4: Sectional
specification for power transformers for switched mode power supplies
(SMPS) on the basis of the capability approval procedure.
EN 62053-31:1998—Electricity metering equipment
(ac)—Particular requirements—Part 31: Pulse output devices
for electromechanical and electronic meters (two wires only).
ENV 50091-3:1998—Uninterruptible Power Systems
(UPS)—Part 3: Performance requirements and test methods.
ES 201 468:2000—Electromagnetic compatibility
and radio spectrum matters (ERM); Additional electromagnetic compatibility
(EMC) requirements for telecommunications equipment for enhanced availability
of service in specific applications.
ETS 300 127:1994—Equipment engineering (EE);
Radiated emission testing of physically large telecommunication systems.
ETS 300 162:1998—Electromagnetic compatibility
and radio spectrum matters (ERM); Radiotelephone transmitters and receivers
for the maritime mobile service operating in VHF bands; Technical characteristics
and methods of measurement.
ETS 300 386-1:1994—Equipment engineering
(EE); Telecommunication network equipment; Electromagnetic compatibility
(EMC) requirements; Part 1: Product family overview, compliance criteria,
and test levels.
HD 349 S1:1977—Preferred diameters of wire
terminations of capacitors and resistors.
HD 543.2 S1:1995—Performance and testing
of teleprotection equipment of power systems—Part 2: Analogue comparison
systems.
HD 625.3 S1:1997—Insulation coordination
for equipment within low-voltage systems—Part 3: Use of coatings
to achieve insulation coordination of printed board assemblies.
IEC 61000-3-2:2000—Electromagnetic compatibility
(EMC)—Part 3-2: Limits—Limits for harmonic current emissions
(equipment input current ¾16 A per phase).
IEC 61000-3-3:1994—Electromagnetic
compatibility (EMC)—Part 3: Limits—Section 3: Limitation of
voltage fluctuations and flicker in low-voltage supply systems for equipment
with rated current ¾16 A.
IEC 61000-3-11:2000—Electromagnetic compatibility
(EMC)—Part 3-11: Limits—Limitation of voltage changes, voltage
fluctuations, and flicker in public low-voltage supply systems—Equipment
with rated current ¾75 A and subject to conditional connection.
R014-001:1999—Guide for the evaluation of electromagnetic
fields around power transformers.
TR 101 651:1999—Electromagnetic compatibility and radio
spectrum matters (ERM); Classification of the electromagnetic environment
conditions for equipment in telecommunication networks.
AE4L-81-2:1991—Test waveforms and techniques
for assessing the effects of lightning-induced transients.
AIR 1147:1970—Electromagnetic interference
on aircraft from jet engine charging.
AIR 1209:1998—Construction and calibration
of parallel plate transmission line for electromagnetic interference
susceptibility testing.
AIR 1221:1971—Electromagnetic compatibility
(EMC) system design checklist.
AIR 1255:1971—Spectrum analyzers for electromagnetic
interference measurements.
AIR 1394:1998—Cabling guidelines for electromagnetic
compatibility.
AIR 1404:1976—Dc resistivity versus RF
impedance of EMI gaskets.
AIR 1423:1977—Electromagnetic compatibility
on gas turbine engines for aircraft propulsion.
AIR 1425:1998—Methods of achieving electromagnetic
compatibility of gas turbine engine accessories, for self-propelled
vehicles.
AIR 1700:1998—Upper frequency measurement
boundary for evaluation of shielding effectiveness in cylindrical
systems.
ANSI C37.32:1996—American national standard
for switchgear—High-voltage air switches, bus supports, and switch
accessories—Schedules of preferred ratings, manufacturing specifications,
and application guide.
ANSI C37.42:1996—American national standard
for switchgear—Distribution cutouts and fuse links—Specifications.
ANSI C37.44:1981 (R1987)—American national
standard specifications for distribution oil cutouts and fuse links.
ANSI C37.45:1981 (R1987)—American
national standard specifications for distribution enclosed single-pole
air switches.
ANSI C37.50:1989—American national standard
for switchgear—Low-voltage ac power circuit breakers used in
enclosures—Test procedures.
ANSI C37.51:1989—American national standard
for switchgear—Metal-enclosed low-voltage ac power circuit-breaker
switchgear assemblies—Conformance test procedures.
ANSI C37.52:1974 (R1989)—American national
standard test procedures for low-voltage ac power circuit protectors
used in enclosures.
ANSI C37.54:1996—American national standard
for switchgear—Indoor alternating-current high-voltage circuit
breakers applied as removable elements in metal-enclosed switchgear
assemblies—Conformance test procedures.
ANSI C37.55:1989—American national standard
for switchgear—Metal-clad switchgear assemblies—Conformance
test procedures.
ANSI C37.57:1990—American national standard
for switchgear—Metal-enclosed interrupter switchgear assemblies—Conformance
testing.
ANSI C37.58:1990—American national
standard for switchgear—Indoor ac medium-voltage switches for
use in metal-enclosed switchgear—Conformance test procedures.
ANSI C37.66:1969 (R1988)—American national
standard for requirements for oil-filled capacitor switches for alternating-current
systems.
ANSI C37.85:1989 (R1998)—American national
standard for switchgear—Alternating-current high-voltage power
vacuum interrupters—Safety requirements for x-radiation limits.
ANSI C63.011:2000—American national standard
for limits and methods of measurement of radio disturbance characteristics
of industrial, scientific, and medical (ISM) radio-frequency equipment.
ANSI C63.022:1996—American national standard
for limits and methods of measurement of radio disturbance characteristics
of information technology equipment.
ANSI C63.2:1996—American national standard
for electromagnetic noise and field strength instrumentation, 10 kHz
to 40 GHz specifications.
ANSI C63.4:2000—Interim standard for methods
of measurement of radio noise emissions from low-voltage electrical
and electronics equipment in the range of 9 kHz to 40 GHz.
ANSI C63.5:1998—American national standard
for electromagnetic compatibility—Radiated emission measurements
in electromagnetic interference (EMI) control—Calibration of
antennas.
ANSI C63.6:1996—American national standard
guide for the computation of errors in open-area test site measurements.
ANSI C63.7:1992—American national standard
for construction of open-area test sites for performing radiated emission
measurements.
ANSI C63.12:1999—American national standard
for recommended practice for electromagnetic compatibility limits.
ANSI C63.13:1991—American national standard
guide on the application and evaluation of EMI power-line filters
for commercial use.
ANSI C63.14:1998—American national standard
dictionary for technologies of electromagnetic compatibility (EMC),
electromagnetic pulse (EMP), and electrostatic discharge (ESD).
ANSI C63.17:1998—American national standard
for methods of measurement of the electromagnetic and operational
compatibility of unlicensed personal communications services (UPCS)
devices.
ANSI C63.18:1997—American national
standard recommended practice for an on-site ad hoc test method for
estimating radiated electromagnetic immunity of medical devices to
specific radio-frequency transmitters.
ARP 936:1989—Capacitor, 10 µF for
EMI measurements.
ARP 958:1997—Electromagnetic interference
measurement antennas—Standard calibration method.
ARP 958D:1999—Electromagnetic interference
measurement antennas—Standard calibration method.
ARP 1172:1972—Filters, conventional, electromagnetic
interference reduction, general specification.
ARP 1173:1975—Test procedure to measure
the RF shielding characteristics of EMI gaskets.
ARP 1267:1973—Electromagnetic interference
measurement impulse generators—Standard calibration requirements
and techniques.
ARP 1481:1998—Corrosion control and electrical
conductivity in enclosure design.
ARP 1705:1981—Coaxial test procedure to
measure the RF shielding characteristics of EMI gasket materials.
ARP 1870:1987—Aerospace systems electrical
bonding and grounding for electromagnetic compatibility and safety.
ARP 1972:1993—Recommended measurement
practices and procedures for EMC testing.
ARP 4242:1999—Electromagnetic compatibility
control requirements systems.
ARP 4244:1998—Recommended insertion-loss
test methods for EMI power-line filters.
ARP 5412:1999—Aircraft lightning environment
and related test waveforms.
ARP 5413:1999—Certification of aircraft
electrical/electronic systems for the indirect effects of lightning.
AS 13441:1998—Test methods for electrical
connectors.
AS 25064:1999—Conduit, flexible, radio-frequency
shielding.
AS 8023:1985—Minimum performance standards
for airborne static electric power inverters.
ASTM B904:2000—Standard specification
for autocatalytic nickel over autocatalytic copper for electromagnetic
interference shielding.
ASTM E1004:1994—Electrical conductivity,
using the electromagnetic (eddy-current) method, determining.
IEEE 32:1972 (R1997)—IEEE standard requirements,
terminology, and test procedures for neutral grounding devices.
IEEE 81:1994—Earth resistivity, measuring,
ground impedance, and earth surface potentials of a ground system.
IEEE 139:1988 (R1999)—IEEE recommended
practice for the measurement of radio-frequency emission from industrial,
scientific, and medical (ISM) equipment installed on user's premises.
IEEE 140:1990 (R1995)—IEEE recommended
practice for minimization of interference from radio-frequency heating
equipment.
IEEE 213:1987 (R1998)—IEEE standard procedure
for measuring conducted emissions in the range of 300 kHz to 25 MHz
from television and FM broadcast receivers to power lines.
IEEE 291:1991—IEEE standard methods for
measuring electromagnetic field strength of sinusoidal continuous
waves, 30 Hz to 30 GHz.
IEEE 299:1997—IEEE standard for measuring
the effectiveness of the electromagnetic shielding enclosure.
IEEE 376:1975 (R1998)—IEEE standard for
the measurement of impulse strength and impulse bandwidth.
IEEE 469:1988 (R1994)—IEEE recommended
practice for voice-frequency electrical-noise tests of distribution
transformers.
IEEE 473:1985 (R1997)—IEEE recommended
practice for an electromagnetic site survey (10 kHz to 10 GHz).
IEEE 475:2000—IEEE standard measurement
procedure for field-disturbance sensors, 300 MHz to 40 GHz.
IEEE 518:1982 (R1996)—IEEE guide for the
installation of electrical equipment to minimize noise inputs to controllers
from external sources.
IEEE 539:1990—IEEE standard definitions
of terms relating to corona and field effects of overhead power lines.
IEEE 644:1994—IEEE standard procedure
for measurement of power frequency electric and magnetic fields from
ac power lines.
IEEE 776:1992 (R1998)—IEEE recommended
practice for inductive coordination of electric supply and communication
lines.
IEEE 824:1994—IEEE standard for series
capacitors in power systems.
IEEE 935:1989 (R1995)—IEEE guide on terminology
for tools and equipment to be used in live-line working (IEC 743:1983).
IEEE 1036:1992—IEEE guide for application
of shunt power capacitors.
IEEE 1048:1990—IEEE guide for protective
grounding of power lines.
IEEE 1128:1998—IEEE recommended practice
for radio-frequency (RF) absorber evaluation in the range of 30 MHz
to 5 GHz.
IEEE 1140:1994 (R1999)—IEEE standard test
procedures for the measurement of electric and magnetic fields from
video display terminals (VDTs) from 5 Hz to 400 kHz.
IEEE 1247:1998—IEEE standard for interrupter
switches for ac, rated above 1000 V.
IEEE 1302:1998—IEEE guide for the electromagnetic
characterization of conductive gaskets in the frequency range of dc
to 18 GHz (references IEEE 100:1996 and 299:1997).
IEEE 1309:1996—IEEE standard for calibration
of electromagnetic field sensors and probes excluding antennas from
9 kHz to 40 GHz.
IEEE 1460:1996—IEEE guide for the measurement
of quasi-static magnetic and electric fields.
IEEE C37.04:1999—IEEE standard rating
structure for ac high-voltage circuit breakers.
IEEE C37.09:1999—IEEE standard test procedure
for ac high-voltage circuit breakers rated on a symmetrical current
basis.
IEEE C37.010:1999—IEEE application guide
for ac high-voltage circuit breakers rated on a symmetrical current
basis.
IEEE C37.012:1979 (R2000)—IEEE
application guide for capacitance current switching for ac high-voltage
circuit breakers rated on a symmetrical current basis.
IEEE C37.083:1999—IEEE guide to synthetic
capacitive current-switching test of ac high-voltage circuit breakers.
IEEE C37.14:1999—IEEE standard for low-voltage
dc power circuit breakers used in enclosures.
IEEE C37.24:1986 (R1998)—IEEE guide for
evaluating the effect of solar radiation on outdoor metal-enclosed
switchgear.
IEEE C37.26:1972 (R1996)—IEEE standard
guide for methods of power-factor measurement for low-voltage inductive
test circuits.
IEEE C37.27:1987 (R1998)—IEEE standard
application guide for low-voltage ac nonintegrally fused power circuit
breakers (using separately mounted current-limiting fuses).
IEEE C37.29:1981 (R1990)—IEEE standard
for low-voltage ac power circuit protectors used in enclosures.
IEEE C37.30:1997—IEEE standard requirements
for high-voltage switches.
IEEE C37.34:1994—IEEE standard test code
for high-voltage air switches.
IEEE C37.35:1995—IEEE guide for the application,
installation, operation, and maintenance of high-voltage air disconnecting
and load interrupter switches.
IEEE C37.36b:1990—IEEE guide to current
interruption with horn-gap air switches.
IEEE C37.37:1996—IEEE standard
for loading guide for ac high-voltage air switches (in excess of 1000
V).
IEEE C37.38:1989—IEEE standard
for gas-insulated, metal-enclosed disconnecting, interrupter, and
grounding switches.
IEEE C37.40:1993—IEEE standard service
conditions and definitions for high-voltage fuses, distribution enclosed
single-pole air switches, fuse disconnecting switches, and accessories.
IEEE C37.40b:1996—IEEE standard service
conditions and definitions for external fuses for shunt capacitors.
IEEE C37.41:1994—IEEE standard design
tests for high-voltage fuses, distribution enclosed single-pole air
switches, fuse disconnecting switches, and accessories.
IEEE C37.41e:1996—IEEE standard design
tests for external fuses and shunt capacitors.
IEEE C37.48:1997—IEEE guide for application,
operation, and maintenance of high-voltage fuses, distribution enclosed
single-pole air switches, fuse disconnecting switches, and accessories.
IEEE C37.59:1996—IEEE standard requirements
for conversion of power switchgear equipment.
IEEE C37.60:1981 (R1992)—IEEE standard
requirements for overhead, pad-mounted, dry-vault, and submersible
automatic circuit reclosers and fault interrupters for ac systems.
IEEE C37.61:1973 (R1992)—IEEE standard
guide for the application, operation, and maintenance of automatic
circuit reclosers.
IEEE C37.63:1997—IEEE standard requirements
for overhead, pad-mounted, dry-vault, and submersible automatic line
sectionalizers of ac systems (references: IEEE 4:1995, 386:1995, C37.09:1979
[R1988], C37.24:1986 [R1991], C37.100:1992).
IEEE C37.71:1984 (R1990)—IEEE standard
for three-phase, manually operated subsurface load interrupting switches
for alternating current systems.
IEEE C37.81:1989 (R1999)—IEEE guide for
seismic qualification of Class 1E metal-enclosed power switchgear
assemblies.
IEEE C37.90.2:1995—IEEE standard withstand
capability of relay systems to radiated electromagnetic interference
from transceivers.
IEEE C37.99:2000—IEEE guide for the protection
of shunt capacitor banks.
IEEE C37.100:1992—IEEE standard definitions
for power switchgear.
|
