|
|
 |
 |
|
 |
|
 |
|
|
Free Subscriptions Current Issue Article Archives Suppliers Directory Staff Info Contact us |
| |
Product Safety StandardsThe following list is a sampling of product safety standards in the United States and Europe.ANSI/ISA S82.01-1994—Safety standard for electrical and electronic test, measuring, controlling, and related equipment—General requirements. ANSI/ISA S82.03-1988—Safety standard for electrical and electronic test, measuring, controlling, and related equipment (electrical and electronic process measurement and control equipment), (partial revision and redesignation of ANSI C39.5-1974). C95.1-1991—IEEE standard for safety
levels with respect to human exposure to radio-frequency
electromagnetic fields, 3 kHz to 300 GHz.
EN 528—Rail-dependent storage and
retrieval equipment—Safety.
EN 536—Road construction machines—Asphalt
mixing plants—Safety requirements.
EN 574—Safety of machinery—Two-hand
control devices—Functional aspects—Principles
for design.
EN 708—Agricultural machinery—Soil-working
machines with powered tools—Safety.
EN 709—Agricultural and forestry machinery—Pedestrian-controlled
tractors with mounted rotary cultivators, motor
hoes, motor hoes with drive wheel(s)—Safety.
EN 745—Agricultural machinery—Rotary
mowers and flail-mowers—Safety.
EN 774/A2—Garden equipment—Handheld,
integrally powered hedge trimmers—Safety.
EN 777-4—Multiburner gas-fired overhead
radiant tube heater systems for nondomestic use—Part
4: System H—Safety.
EN 786—Garden equipment—Electrically
powered walk-behind and handheld lawn trimmers
and lawn edge trimmers—Mechanical safety.
EN 793—Particular requirements for
safety of medical supply units.
EN 809—Pumps and pump units for liquids—Common
safety requirements.
EN 818-1—Short link chain for lifting
purposes—Safety—Part 1: General conditions of
acceptance.
EN 836—Garden equipment—Powered lawnmowers—Safety.
EN 847-1—Tools for woodworking—Safety
requirements—Part 1: Milling tools and circular
saw blades.
EN 848-2—Safety of woodworking machines—One-side
molding machines with rotating tool—Part 2: Single
spindle hand fed/integrated fed routing machines.
EN 860—Safety of woodworking machines—One
side thickness planing machines.
EN 869—Safety requirements for high-pressure
metal die casting units.
EN 907—Agricultural and forestry machinery—Sprayers
and liquid fertilizer distributors—Safety.
EN 908—Agricultural and forestry machinery—Reel
machines for irrigation—Safety.
EN 909—Agricultural and forestry machinery—Center
pivot and moving lateral types—Irrigation machines—Safety.
EN 940— Safety of woodworking machines—Combined
woodworking machines.
EN 953—Safety of machinery—General
requirements for the design and construction of
fixed and movable guards.
EN 954-1—Safety of machinery—Safety-related
parts of control systems—Part 1: General principles
for design.
EN 957-1/A1—Stationary training equipment—Part
1: General safety requirements and test methods
(including Amendment 1:1998).
EN 957-7—Stationary training equipment—Part
7: Rowing machines, additional specific safety
requirements and test methods.
EN 957-8—Stationary training equipment—Part
8: Steppers, stair climbers, and climbers—Additional
specific safety requirements and test methods.
EN 982—Safety of machinery—Safety
requirements for fluid power systems and their
components—Hydraulics.
EN 983—Safety of machinery—Safety
requirements for fluid power systems and their
components—Pneumatics.
EN 996—Piling equipment—Safety requirements.
EN 999—Safety of machinery—The positioning
of protective equipment with respect to approach
speeds of machine parts toward the human body.
EN 41003:1998—Particular safety requirements
for equipment to be connected to telecommunications
networks.
EN 45502-1—Active implantable medical
devices—Part 1: General requirements for safety,
marking, and information to be provided by the
manufacturer.
EN 50060:1989—Power sources for manual
metal arc welding with limited duty; Amendment
A1:1994 to EN 50060:1989.
EN 50061/A1—Medical electrical equipment—Safety
of implantable cardiac pacemakers.
EN 50063:1989—Safety requirements
for the construction and the installation of equipment
for resistance welding and allied processes.
EN 50065-1:1991—Signaling on low-voltage
electrical installations in the frequency range
3 kHz to 148.5 kHz—Part 1: General requirements,
frequency bands, and electromagnetic disturbances;
Amendment A3:1996 to EN 50065-1:1991.
EN 50083-1/A2—Cabled distribution
systems for television, sound, and interactive
multimedia signals—Part 1: Safety requirements.
EN 50086-2-3:1995—Conduit systems
for electrical installations—Part 2-3: Particular
requirements for flexible conduit systems; Amendment
A11:1998 to EN 50086-2-3:1995.
EN 50086-2-4:1994—Conduit systems
for electrical installations—Part 2-4: Particular
requirements for conduit systems buried underground.
EN 50088/A2—Safety of electric toys.
EN 50090-2-2:1996—Home and building
electronic systems (HBES)—Part 2-2: System overview—General
technical requirements.
EN 50091-1:1993—Uninterruptible power
systems (UPS)— Part 1: General and safety requirements.
EN 50106—Safety of household and similar
electrical appliances—Particular rules for routine
tests referring to appliances under the scope
of EN 60335-1 and EN 60967.
EN 50116—Information technology equipment—Routine
electrical safety testing in production.
EN 50122-1—Railway applications—Fixed
installations—Part1: Protective provisions relating
to electrical safety and earthing.
EN 50144-1—Safety of handheld electric
motor–operated tools—Part 1: General requirements.
EN 50165—Electrical equipment on nonelectric
appliances for household and similar purposes—Safety
requirements.
EN 60065/A11—Safety requirements for
mains-operated electronic and related apparatus
for household and similar general use.
EN 60065—Audio, video, and similar
electronic apparatus—Safety requirements.
EN 60073—Basic and safety principles
for man-machine interface, marking and identification—Coding
principles for indication devices and actuators.
EN 60204-1—Safety of machinery—Electrical
equipment of machines—Part 1: General requirements.
EN 60215—Safety requirements for radio
transmitting equipment.
EN 60335-2-9/A1—Safety of household
and similar electrical appliances—Part 2: Particular
requirements for toasters, grills, roasters, and
similar appliances.
EN 60335-2-90—Safety of household
and similar electrical appliances—Part 2: Particular
requirements for commercial microwave ovens.
EN 60446—Basic and safety principles
for man-machine interface, marking and identification—Identification
of conductors by colors or numerals.
EN 60601—Medical electrical equipment—Part
1: General requirements for safety.
EN 60601-1-4—Medical electrical equipment—Part
1: General requirements for safety. Collateral
standard: Programmable electrical medical systems.
EN 60601-2-27—Medical electrical equipment—Part
2: Particular requirements for the safety of electrocardiographic
monitoring equipment.
EN 60601-2-31/A1—Medical electrical
equipment—Part 2-31: Particular requirements
for the safety of external cardiac pacemakers
with internal power source.
EN 60601-2-34—Medical electrical equipment—Part
2: Particular requirements for the safety of direct
blood pressure monitoring equipment.
EN 60601-2-40—Medical electrical equipment—Part
2-40: Particular requirements for the safety of
electromyographs and evoked response equipment.
EN 60601-2-44—Medical electrical equipment—Part
2-44: Particular requirements for the safety of
x-ray equipment for computed tomography.
EN 60601-2-45—Medical electrical equipment—Part
2-45: Particular requirements for the safety of
mammographic x-ray equipment and mammographic
stereotactic devices.
EN 60601-2-46—Medical electrical equipment—Part
2-46: Particular requirements for the safety of
operating tables.
EN 60601-2-7—Medical electrical equipment—Part
2-7: Particular requirements for the safety of
high-voltage generators of diagnostic x-ray generators.
EN 60695-2-1/0:1996—Fire hazard testing—Part
2: Test methods—Section 1/sheet 0: Glow-wire
test methods—General.
EN 60719:1993—Calculation of the lower
and upper limits for the average outer dimensions
of cables with circular copper conductors and
of rated voltages up to and including 450 and
750 V.
EN 60742—Isolating transformers and
safety-isolating transformers—Requirements.
EN 60799—Cord sets—Nonrewirable cord
sets for appliances—Safety requirements and test
methods.
EN 60950—Safety of information technology
equipment, including electrical business equipment.
EN 60950/A11—Safety of information
technology equipment.
EN 60967—Safety of electrically heated
blankets, pads, and similar flexible heating appliances
for household use.
EN 61010-1/A2—Safety requirements
for electrical equipment for measurement, control,
and laboratory use—Part 1: General requirements.
EN 61010-2-020/A1—Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 2-020: Particular requirements for laboratory centrifuges. EN 61010-2-031—Safety requirements
for electrical equipment for measurement, control,
and laboratory use—Part 2-031: Particular requirements
for handheld probe assemblies for electrical measurement
and test.
EN 61010-2-041—Safety requirements
for electrical equipment for measurement, control,
and laboratory use—Part 2-041: Particular requirements
for autoclaves using steam
for the treatment of medical materials, and for laboratory processes. EN 61010-2-042—Safety requirements
for electrical equipment for measurement, control,
and laboratory use—Part 2-042: Particular requirements
for autoclaves and sterilizers using toxic gas
for the treatment of medical materials and for
laboratory processes.
EN 61011-1/A2—Electric fence energizers—Safety
requirements for battery-operated electric fence
energizers suitable for connection to the supply
mains.
EN 61011/A11—Electric fence energizers—Safety
requirements for mains-operated electric fence
energizers.
EN 61029-1—Safety of transportable
motor–operated electric tools—Part 1: General
requirements.
EN 61050/A1—Transformers for tubular
discharge lamps having a no-load output voltage
exceeding 1000 V (neon-transformers)—General
and safety requirements.
EN 61204—Low-voltage power supply
devices, dc output—Performance characteristics
and safety requirements.
EN 61210—Connecting devices—Flat
quick-connect terminations for electrical copper
conductors—Safety requirements.
EN 61285—Industrial-process control—Safety
of analyzer houses.
EN 61293—Marking of electrical equipment
with ratings related to electrical supply—Safety
requirements.
EN 61310-1—Safety of machinery—Indication,
marking, and actuation—Part 1: Requirements for
visual, auditory, and tactile signals.
EN 61310-3—Safety of machinery—Indication,
marking, and actuation—Part 3: Requirements for
the location and operation of actuators.
EN 61496-1—Safety of machinery—Electrosensitive
protective equipment—Part 1: General requirements
and tests.
EN 61558-1—Safety of power transformers,
power-supply units, and similar—Part 1: General
requirements and tests.
EN 61558-2-6—Safety of power transformers,
power-supply units, and similar—Part 2-6: Particular
requirements for safety isolating transformers
for general use of system properties for the purpose
of system assessment—Part 7: Assessment of system
safety.
EN 61558-2-1—Safety of power transformers,
power-supply units, and similar—Part 2-1: Particular
requirements for separating transformers for general
use.
EN 61558-2-2—Safety of power transformers,
power-supply units, and similar—Part 2-2: Particular
requirements for control transformers.
EN 61558-2-5—Safety of power transformers,
power-supply units, and similar—Part 2-5: Particular
requirements for shaver transformers and shaver
supply units.
EN 61558-2-7—Safety of power transformers,
power-supply units, and similar—Part 2-7: Particular
requirements for transformers for toys.
IEC 60065:1998—Audio, video, and similar
electronic apparatus—Safety requirements.
IEC 60950:1999—Safety of information
technology (IT) equipment.
IEC 61010-2-042:1997—Safety requirements
for electrical equipment for measurement, control,
and laboratory use—Part 2-042: Particular requirements
for autoclaves and sterilizers using toxic gas
for the treatment of medical materials, and for
laboratory processes.
IEC 61069-7:1999—Industrial-process
measurement and control—Evaluation.
IEC 61097-7:1996—Global maritime distress
and safety system (GMDSS)—Part 7: Shipborne VHF
radiotelephone transmitter and receiver—Operational
and performance requirements, methods of testing,
and required test results.
IEC 61310-3:1999—Safety of machinery—Indication,
marking, and actuation—Part 3: Requirements for
the location and operation of actuators.
IEC 61496-1:1997—Safety of machinery—Electrosensitive
protective equipment—Part 1: General requirements
and tests.
IEC 61508-1:1998—Functional safety
of electrical/electronic/programmable safety-related
systems—Part 1: General requirements.
IEC 61508-5:1998—Functional safety
of electrical/electronic/programmable electronic
safety-related systems—Part 5: Examples of methods
for the determination of safety integrity levels.
IEC 61557-1:1997—Electrical safety
in low-voltage distribution systems up to 1000
V ac and 1500 V dc—Equipment for testing, measuring,
or monitoring of protective measures—Part 1:
General requirements.
IEC 61557-2:1997—Electrical safety
in low-voltage distribution systems up to 1000
V ac and 1500 V dc—Equipment for testing, measuring,
or monitoring of protective measures—Part 2:
Insulation resistance.
IEC 61557-3:1997—Electrical safety
in low-voltage distribution systems up to 1000
V ac and 1500 V dc—Equipment for testing, measuring,
or monitoring of protective measures—Part 3:
Loop impedance.
IEC 61557-4:1997—Electrical safety
in low-voltage distribution systems up to 1000
V ac and 1500 V dc—Equipment for testing, measuring,
or monitoring of protective measures—Part 4:
Resistance of earth connection and equipotential
bonding. IEC 61557-5:1997—Electrical safety
in low-voltage distribution systems up to 1000
V ac and 1500 V dc—Equipment for testing, measuring,
or monitoring of protective measures—Part 5:
Resistance to earth.
IEC 61557-6:1997—Electrical safety
in low-voltage distribution systems up to 1000
V ac and 1500 V dc—Equipment for testing, measuring,
or monitoring of protective measures—Part 6:
Residual current devices (RCD) in TT and TN systems.
IEC 61557-8:1997—Electrical safety
in low-voltage distribution systems up to 1000
V ac and 1500 V dc—Equipment for testing, measuring,
or monitoring of protective measures—Part 8:
Insulation monitoring devices for IT systems.
IEC 61558-1:1998—Safety of power transformers,
power-supply units, and similar—Part 1: General
requirements and tests.
IEC 61558-2-1:1997—Safety of power
transformers, power-supply units, and similar—Part
2: Particular requirements for separating transformers
for general use.
IEC 61558-2-15:1999—Safety of power
transformers, power-supply units, and similar—Part
2-15: Particular requirements for isolating transformers
for the supply of medical locations.
IEC 61558-2-17:1997—Safety of power
transformers, power-supply units, and similar—Part
2: Particular requirements for transformers for
switch-mode power supplies.
IEC 61558-2-2:1997—Safety of power
transformers, power supply units, and similar—Part
2-2: Particular requirements for control transformers.
ISO 13090-1:1998—Mechanical vibration
and shock—Guidance on safety aspects of tests
and experiments with people—Part 1: Exposure
to whole-body mechanical vibration and repeated
shock.
SAE J284 (JAN 91)—Safety alert symbol
for agricultural, construction, and industrial
equipment
|
