|
|
 |
 |
|
 |
|
 |
|
|
Free Subscriptions Current Issue Article Archives Suppliers Directory Staff Info Contact us |
|
|
EMC StandardsThe following list details the major electromagnetic compatibility (EMC) standards in Europe.ETSI (TBR) TBR 35: Terrestrial trunked radio (TETRA); emergency
access.
TBR 41 (February 1998): Satellite personal communications
networks (S-PCN); mobile earth stations (MESs), including handheld
earth stations, for S-PCN in the 1.6/2.4 GHz bands under the mobile
satellite service (MSS); terminal essential requirements.
TBR 42 (February 1998): Satellite personal communications
networks (S-PCN); mobile earth stations (MESs), including handheld
earth stations for S-PCN in the 2.0 GHz bands under the mobile
satellite service (MSS); terminal essential requirements.
TBR 43 (May 1998): Satellite earth stations and systems
(SES); very small aperture terminal (VSAT) transmit-only, transmit-and-receive,
receive-only satellite earth stations operating in the 4 and 6
GHz frequency bands.
TBR 44 (May 1998): Satellite earth stations and systems (SES); land mobile earth stations (LMES) operating in the 1.5 and 1.6 GHz frequency bands providing voice and/or data communications. In addition, standards published under Directives 73/23/EC and 89/336/EEC may be used to demonstrate compliance with Articles 3(1)(a) and 3(1)(b) of Directive 1999/5/EC. CENELEC EN 50065-1:1991—Signaling on low-voltage electrical
installations in the frequency range 3 to 148.5 kHz—Part 1: General
requirements, frequency bands and electromagnetic disturbances;
Amendment A1:1992 to EN 50065-1:1991; Amendment A2:1995 to EN
50065-1:1991; Amendment A3:1996 to EN 50065-1:1991.
EN 50081-1:1992—Electromagnetic compatibility—Generic
emission standard—Part 1: Residential, commercial, and light
industry.
EN 50081-2:1993—Electromagnetic compatibility—Generic
emission standard—Part 2: Industrial environment.
EN 50082-1:1992—Electromagnetic compatibility—Generic
immunity standard—Part 1: Residential, commercial, and light
industry.
EN 50082-1:1997—Electromagnetic compatibility—Generic
emission standard—Part 1: Residential, commercial, and light
industry.
EN 50082-2:1995—Electromagnetic compatibility—Generic
immunity standard—Part 2: Industrial environment.
EN 50083-2:1995—Cabled distribution systems for television,
sound, and interactive multimedia signals—Part 2: Electromagnetic
compatibility for equipment; Amendment A1:1997 to EN 50083-2:1995.
EN 50090-2-2:1996—Home and building electronic systems
(HBES)—Part 2-2: System overview—General technical requirements.
EN 50091-2:1995—Uninterruptible power systems (UPS)—Part
2: EMC requirements.
EN 50130-4:1995—Alarm systems—Part 4: Electromagnetic
compatibility—Product family standard: Immunity requirements
for components of fire, intruder, and social alarm systems; Amendment
A1:1998 to EN 50130-4:1995 Note 3 1.1.2001.
EN 50148:1995—Electronic taximeters.
EN 50199:1995—Electromagnetic compatibility (EMC)—Product
standard for arc welding equipment.
EN 50227:1997—Control circuit devices and switching
elements, proximity sensors, dc interface for proximity sensors
and switching amplifiers (NAMUR).
EN 50270:1999—Electromagnetic compatibility—Electrical
apparatus for the detection and measurement of combustible gases,
toxic gases, or oxygen.
EN 55011:1991—Limits and methods of measurement of radio disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment; Amendment A2:1996 to EN 55011:1991; Amendment A1:1997 to EN 55011:1991. EN 55011:1998—Industrial, scientific, and medical
(ISM) radio-frequency equipment—Radio disturbance characteristics—Limits
and methods of measurement; Amendment A1:1999 to EN 55011.
EN 55013:1990—Limits and methods of measurement of
radio disturbance characteristics of broadcast receivers and associated
equipment; Amendment A12:1994 to EN 55013:1990; Amendment A13:1996
to EN 55013:1990; Amendment A14:1999 to EN 55013:1990.
EN 55014-1:1993—Electromagnetic compatibility—Requirements
for household appliances, electric tools, and similar apparatus—Part
1: Emission—Product family standard; Amendment A1:1997 to EN
55014-1:1993; Amendment A2:1999 to EN 55014-1:1993.
EN 55014-2:1997—Electromagnetic compatibility—Requirements
for household appliances, electric tools, and similar apparatus—Part
2: Immunity—Product family standard.
EN 55015:1993—Limits and methods of measurement of
radio disturbance characteristics of electrical lighting and similar
equipment.
EN 55015:1996—Limits and methods of measurement of
radio disturbance characteristics of electrical lighting and similar
equipment; Amendment A1:1997 to EN 55015:1996; Amendment A2:1999
to EN 55015:1996.
EN 55020:1988—Immunity from radio interference of
broadcast receivers and associated equipment.
EN 55020:1994—Electromagnetic immunity of broadcast
receivers and associated equipment; Amendment A11:1996 to EN 55020:1994;
Amendment A12:1999 to EN 55020:1994; Amendment A14:1999 to EN
55020: 1994; Amendment A13:1999 to EN 55020:1994.
EN 55022:1987—Limits and methods of measurement of radio disturbance characteristics of information technology equipment. EN 55022:1994—Limits and methods of measurement of
radio disturbance characteristics of information technology equipment;
Amendment A1:1995 to EN 55022:1994; Amendment A2:1997 to EN 55022:1994.
EN 55022:1998—Information technology equipment—Radio
disturbance characteristics—Limits and methods of measurement.
EN 55024:1998—Information technology equipment—Immunity
characteristics—Limits and methods of measurement.
EN 55103-1:1996—Electromagnetic compatibility—Product
family standard for audio, video, audiovisual, and entertainment
lighting control apparatus for professional use—Part 1: Emission.
EN 55103-2:1996—Electromagnetic compatibility—Product
family standard for audio, video, audiovisual, and entertainment
lighting control apparatus for professional use—Part 2: Immunity.
EN 55104:1995—Electromagnetic compatibility—Immunity
requirements for household appliances, tools, and similar apparatus—Product
family standard.
EN 60439-1:1994—Low-voltage switch gear and control
gear assemblies—Part 1: Type-tested and partially type-tested
assemblies; Amendment A11:1996 to EN 60439-1:1994.
EN 60439-1:1999—Low-voltage switch gear and control
gear assemblies—Part 1: Type-tested and partially type-tested
assemblies.
EN 60521:1995—Class 0.5; 1 and 2 alternating-current
watt-hour meters.
EN 60555-2:1987—Disturbances in supply systems caused
by household appliances and similar electrical equipment—Part
2: Harmonics.
EN 60555-3:1987—Disturbances in supply systems caused by household appliances and similar electrical equipment—Part 3: voltage fluctuations; Amendment A1:1991 to EN 60555-3:1987. EN 60669-2-1:1996—Switches for household and similar
fixed-electrical installations—Part 2: Particular requirements,
Section 1: Electronic switches; Amendment A11:1997 to EN 60669-2-1:1996.
EN 60669-2-2:1997—Switches for household and similar
fixed-electrical installations—Part 2: Particular requirements,
Section 2: Electromagnetic remote-control switches (RCS).
EN 60669-2-3:1996—Switches for household and similar
fixed-electrical installations—Part 2: Particular requirements,
Section 3: Time-delay switches (TDS).
EN 60687:1992—Alternating current static watt-hour
meters for active energy (classes 0.2 S and 0.5 S).
EN 60730-1:1995—Automatic electrical controls for
household and similar use—Part 1: General requirements; Amendment
A11:1996 to EN 60730-1:1995.
EN 60730-2-5:1995—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
automatic electrical burner control systems.
EN 60730-2-6:1995—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
automatic electrical pressure sensing controls including mechanical
requirements; Amendment A1:1997 to EN 60730-2-6:1995.
EN 60730-2-7:1991—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
timers and time switches; Amendment A1:1997 to EN 60730-2-7:1991.
EN 60730-2-8:1995—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
electrically operated water valves, including mechanical requirements;
Amendment A2:1997 to EN 60730-2-8:1995; Amendment A1:1997 to EN
60730-2-8:1995.
EN 60730-2-9:1995—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
temperature sensing controls; Amendment A1:1996 to EN 60730-2-9:1995;
Amendment A2:1997 to EN 60730-2-9:1995.
EN 60730-2-11:1993—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
energy regulators; Amendment A1:1997 to EN 60730-2-11:1993.
EN 60730-2-14:1997—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
electric actuators.
EN 60730-2-18:1999—Automatic electrical controls for
household and similar use—Part 2: Particular requirements for
automatic electrical water and air flow sensing controls, including
mechanical requirements.
EN 60870-2-1:1996—Telecontrol equipment and systems—Part
2: Operating conditions—Section 1: Power supply and electromagnetic
compatibility.
EN 60945:1997—Maritime navigation and radiocommunication
equipment and systems—General requirements—Methods of testing
and required test results.
EN 60947-1:1997—Low-voltage switch gear and control
gear—Part 1: General rules.
EN 60947-1:1999—Low-voltage switch gear and control
gear—Part 1: General rules.
EN 60947-2:1996—Low-voltage switch gear and control
gear—Part 2: Circuit-breakers; Amendment A1:1997 to EN 60947-2:1996.
EN 60947-3:1992—Low-voltage switch gear and control
gear—Part 3: Switches, disconnectors, switch-disconnectors, and
fuse-combination units; Amendment A1:1995 to EN 60947-3:1992.
EN 60947-3:1999—Low-voltage switch gear and control
gear—Part 3: Switches, disconnectors, switch-disconnectors, and
fuse-combination units.
EN 60947-4-1:1992—Low-voltage switch gear and control
gear—Part 4: Contactors and motor starters—Section 1: Electromechanical
contactors and motor starters; Amendment A2:1997 to EN 60947-4-1:1992.
EN 60947-4-2:1996—Low-voltage switch gear and control
gear—Part 4: Contactors and motor starters—Section 2: ac semiconductor
motor controllers and starters; Amendment A2:1998 to EN 60947-4-2:1996.
EN 60947-5-1:1991—Low-voltage switch gear and control
gear—Part 5: Control circuit devices and switching elements—Section
1: Electromechanical control circuit devices; Amendment A12:1997
to EN 60947-5-1:1991.
EN 60947-5-2:1997—Low-voltage switch gear and control
gear—Part 5: Control circuit devices and switching elements—Section
2: Proximity switches.
EN 60947-5-2:1998—Low-voltage switch gear and control
gear—Part 5-2: Control circuit devices and switching elements—Proximity
switches.
EN 60947-5-3:1999—Low-voltage switch gear and control
gear—Part 5-3: Control circuit devices and switching elements—Requirements
for proximity devices with defined behavior under fault conditions
(PDF).
EN 60947-6-1:1991—Low-voltage switch gear and control
gear—Part 6: Multiple-function equipment—Section 1: Automatic
transfer switching equipment; Amendment A2:1997 to EN 60947-6-1:1991.
EN 60947-6-2:1993—Low-voltage switch gear and control
gear—Part 6-2: Multiple-function equipment—Control and protective
switching devices (or equipment) (CPS); Amendment A1:1997 to EN
60947-6-2:1993.
EN 61000-3-2:1995—Electromagnetic compatibility (EMC)—Part
3-2: Limits—Limits for harmonic current emissions (equipment
input current up to and including 16 A per phase); Amendment A2:1998
to EN 61000-3-2:1995; Amendment A1:1998 to EN 61000-3-2:1995.
EN 61000-3-3:1995—Electromagnetic compatibility (EMC)—Part
3-3: Limits—Limitation of voltage fluctuations and flicker on
low-voltage supply systems for equipment with rated current up
to 16 A.
EN 61000-6-2:1999—Electromagnetic compatibility (EMC)—Part
6-2: Generic standards—Immunity for industrial environments.
EN 61008-1:1994—Electrical accessories—Residual currentoperated
circuit breakers (RCCBs) without integral overcurrent protection
for household and similar uses—Part 1: General rules; Amendment
A2:1995 to EN 61008-1:1994; Amendment A14:1998 to EN 61008-1:1994.
EN 61009-1:1994—Electrical accessories—Residual currentoperated
circuit breakers with integral overcurrent protection for household
and similar uses (RCCBs)—Part 1: General rules; Amendment A1:1995
to EN 61009-1:1994; Amendment A14:1998 to EN 61009-1:1994.
EN 61036:1996—Alternating current static watt-hour
meters for active energy (classes 1 and 2).
EN 61037:1992—Electricity metering—Tariff and load
control—Particular requirements for electronic ripple control
receivers; Amendment A1:1996 to EN 61037:1992; Amendment A2:1998
to EN 61037:1992.
EN 61038:1992—Electricity metering—Tariff and load
control—Particular requirements for time switches; Amendment
A1:1996 to EN 61038:1992; Amendment A2:1998 to EN 61038:1992.
EN 61131-2:1994—Programmable controllers—Part 2:
Equipment requirements and tests; Amendment A11:1996 to EN 61131-2:1994.
EN 61268:1996—Alternating current static varhour meters
for reactive energy (classes 2 and 3).
EN 61326:1997—Electrical equipment for measurement,
control, and laboratory use—EMC requirements; Amendment A1:1998
to EN 61326:1997.
EN 61543:1995—Residual currentoperated protective
devices (RCDs) for household and similar use—Electromagnetic
compatibility.
EN 61547:1995—Equipment for general lighting purposes—EMC
immunity requirements.
EN 61800-3:1996—Adjustable speed electrical power
drive systems—Part 3: EMC product standard including specific
test methods.
EN 61812-1:1996—Specified time relays for industrial use—Part 1: Requirements and tests; Amendment A11:1999 to EN 61812-1:1996. CEN EN 12015:1998—Electromagnetic compatibility—Product
family standard for lifts, escalators, and passenger conveyors—Emission.
EN 12016:1998—Electromagnetic compatibility—Product family standard for lifts, escalators, and passenger conveyors—Immunity. EN ISO 14982:1998—Agricultural and forestry machines—Electromagnetic compatibility—Test methods and acceptance criteria (ISO 14982:1998). ETSI (ETS) ETS 300 086/A2:1997—Radio equipment and systems (RES);
land mobile group; Technical characteristics and test conditions
for radio equipment with an internal or external RF connector
intended primarily for analog speech.
ETS 300 113/A1:1997—Radio equipment and systems (RES);
land mobile service; Technical characteristics and test conditions
for radio equipment intended for the transmission of data (and
speech) and having an antenna connector.
ETS 300 135/A1:1997—Radio equipment and systems (RES);
Angle-modulated citizens band radio equipment (CEPT PR 27 Radio
Equipment); Technical characteristics and methods of measurement.
ETS 300 162:1996—Electromagnetic compatibility and
radio spectrum matters (ERM); Radiotelephone transmitters and
receivers for the maritime mobile service operating in VHF bands;
Technical characteristics/methods of measurement.
ETS 300 197/A2:1997—Transmission and multiplexing
(TM); Parameters for radio relay systems for the transmission
of digital signals and analog video signals operating at 38 GHz.
ETS 300 198/A1:1997—Transmission and multiplexing
(TM); Parameters for radio relay systems for the transmission
of digital signals and analog video signals operating at 23 GHz.
ETSI EN 300 220-1:1997—Electromagnetic compatibility
and radio spectrum matters (ERM); Short-range devices; Technical
characteristics and test methods for radio equipment to be used
in the 25 to 1000 MHz frequency range with power levels ranging
up to 500 mW; Part 1: Parameters intended for regulatory purposes.
ETS 300 224:1998—Electromagnetic compatibility and
radio spectrum matters (ERM); On-site paging service; Technical
and functional characteristics for on-site paging systems, including
test methods.
ETS 300 279/A1:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for private land
mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).
ETS 300 296/A1:1997—Radio equipment and systems (RES);
Land mobile service; Technical characteristics and test conditions
for radio equipment using integral antennas intended primarily
for analog speech.
ETS 300 328/A1:1997—Radio equipment and systems (RES);
Wideband transmission systems; Technical characteristics and test
conditions for data transmission equipment operating in the 2.4
GHz ISM band and using spread spectrum modulation techniques.
ETS 300 329:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) for digital enhanced cordless
telecommunications (DECT) equipment.
ETS 300 340/A1:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) for European radio message
system (ERMES) paging receivers.
ETS 300 341/A1:1997—Radio equipment and systems (RES);
Land mobile service; Technical characteristics and test conditions
for radio equipment using an integral antenna transmitting signals
to initiate a specific response in the receiver.
ETS 300 384/A1:1997—Radio broadcasting systems; Very-high
frequency (VHF), frequency modulated, sound broadcasting transmitters.
ETS 300 385/A1:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for digital fixed
radio links and ancillary equipment with data rates at around
2 Mbit/sec and above.
ETSI EN 300 386-2:1997—Electromagnetic compatibility
and radio spectrum matters (ERM); Telecommunication network equipment;
Electromagnetic compatibility (EMC) requirements; Part 2: Product
family standard.
ETS 300 390/A1:1997—Radio equipment and systems (RES);
Land mobile service; Technical characteristics and test conditions
for radio equipment intended for the transmission of data (and
speech) and using an integral antenna.
ETS 300 433/A2:1997—Radio equipment and systems (RES);
Double sideband (DSB) and/or single sideband (SSB) amplitude modulated
citizens band (CB) radio equipment; Technical characteristics
and methods of measurement.
ETS 300 445/A1:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for wireless microphones
and similar radio-frequency (RF) audio link equipment.
ETS 300 446:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for second-generation
cordless telephone (CT2) apparatus operating in the frequency
band 864.1 to 868.1 MHz, including public access services.
ETS 300 447:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for VHF FM broadcasting
transmitters.
ETS 300 454/A1:1997—Radio equipment and systems (RES);
Wideband audio links; Technical characteristics and test methods.
ETS 300 460/A1:1997—Satellite earth stations and systems
(SES); Maritime mobile earth stations (MMESs) operating in the
1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDCs)
for the global maritime distress and safety system (GMDSS); Technical
characteristics and methods of measurement.
ETS 300 487/A1:1997—Satellite earth stations and systems
(SES); Receive-only mobile earth stations (ROMES) operating in
the 1.5 GHz band providing data communications; Radio-frequency
(RF) specifications.
ETS 300 673:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for 4/6 GHz and 11/12/14
GHz very small aperture terminal (VSAT) equipment and 11/12/13/14
GHz satellite news gathering (SNG) transportable earth station
(TES) equipment.
ETS 300 680-1:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for citizens band
(CB) radio and ancillary equipment (speech and/or non-speech);
Part 1: Angle modulated.
ETS 300 680-2:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for citizens band
(CB) radio and ancillary equipment (speech and/or non-speech);
Part 2: Double sideband (DSB) and/or single side-band (SSB).
ETS 300 682:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for on-site paging
equipment.
ETS 300 683:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for short-range devices
(SRD) operating on frequencies between 9 kHz and 25 GHz.
ETS 300 684:1997—Radio equipment and systems (RES);
Electromagnetic compatibility (EMC) standard for commercially
available amateur radio equipment.
ETS 300 719-1:1997—Radio equipment and systems (RES);
Private wide-area paging service; Part 1: Technical characteristics
for private wide-area paging system.
ETS 300 741:1998—Electromagnetic compatibility and
radio spectrum matters (ERM); Electromagnetic compatibility (EMC)
standard for wide-area paging equipment.
ETS 300 826:1997—Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for 2,4 GHz wideband transmission systems and high-performance radio local-area network (Hiperlan) equipment. ETSI (EN) EN 300 827:1998—Electromagnetic compatibility and
radio spectrum matters (ERM); Electromagnetic compatibility (EMC)
standard for terrestrial trunked radio (TETRA) and ancillary equipment.
EN 300 828:1998—Electromagnetic compatibility and
radio spectrum matters (ERM); Electromagnetic compatibility (EMC)
for radiotelephone transmitters and receivers for the maritime
mobile service operating in the VHF bands.
EN 300 829:1998—Electromagnetic compatibility and
radio spectrum matters (ERM); Electromagnetic compatibility (EMC)
for maritime mobile earth stations (MMES) operating in the 1,5/1,6
GHz bands providing low-bit-rate data communications (LBRDC) for
the global maritime distress and safety system (GMDSS).
EN 300 831:1998—Electromagnetic compatibility and
radio spectrum matters (ERM); Electromagnetic compatibility (EMC)
for mobile earth stations (MES) used within satellite personal
communications networks (S-PCN) operating in the 1.6/2.4 and 2
GHz frequency bands.
|
